想玩四驅 18仔，希望大家推薦一部

RC-18T 真係零件配唔返, 我仲剛買了新車........

我打電話問了gpm(http://gpmracing.com.hk):
Office
Address : 15/F, Edward Wong Tower, 910 Cheung Sha Wan Road, Kowloon, Hong Kong
(MTR Lai Chi Kok Station Exit C)
Telephone : (852) 2385 0313
http://gpmracing.com.hk/catalog/product_info.php?products_id=426
http://gpmracing.com.hk/catalog/product_info.php?products_id=406
都同樣有貨, 仲唔算貴, 不過要office hour去買, 我覺得不如救返rc18t啦.

[ 本帖最後由 任天九 於 2009-2-13 16:21 編輯 ]

???同你缺既果個好似唔同???
對! 正確!  因為係upgrade件, 好多比賽用rc18都會upgrade佢, 好似叫 cvd,
http://www.miponline.com/MIP/Associated_Hop-Ups.html#5
當然, gpm只係hk生產商, mip先係Team Associated 所指果個cvd

我係從yahoo中打 "rc18 setup"中找到人地既set車知料.
http://www.teamassociated.com/racerhub/setup/0setups_1.18.htm
你會發現到有一樣option叫mip cvd, 之後我再跟下就找到gpm有出類同品, 所以先同你分享.
只係咁"橋"比你知多少少, 其實我都未用過

我好似係用Futaba3107, 因為平, 情人節唔同女朋友去睇戲就夠買
但見外國人用hitec hs-65mg, 但要買servosaver ...futaba唔洗
http://www.rcuniverse.com/forum/m_7945870/tm.htm

仲有, sniper 兄說的對, 金屬件唔一定比膠好, 可以就盡量令架車輕d.
如1:10車輪轉頭, 就唔一定要金屬.

點壞先???? check清楚d喎.
我試過Servo 無力......原來係個控壞...

我都去買咗萬向, 同你case一樣, 佢地態度一流.
不過, 都係要再同你講, 唔好比自己架車太重, 同電子野都係去kws買比較好.