Team Powers 電子變速器玩家專區：

sxe10 發表於 2013-7-10 10:39
請問我張設定卡D掣無反應可去那裹維修呢(ver 1.1 140A個張)Thanks!

你可以拿回去你購買的模型店, 之後本公司會安排維修.

想玩車 發表於 2013-7-24 00:37
請問我現在用的是140A電度膠売，是什麼型號？

電度膠殼是v1.1, 不可跟v1.2設定咭共用.

oasc 發表於 2013-7-24 11:05
請問幾時會有今場Team Powers杯子Setting呀

有喇, 請参考以下設定.

http://www.team-powers.com/index.php?thispage=viewnewsandevents&category=1&subcategory=2&products=41

想玩車 發表於 2013-7-25 07:32
咁有冇得在電腦升級程式？

xps 系列是沒有的.

Kevin8933 發表於 2013-7-25 15:46
ching 請問xps70Av1.2 8.5T用粒粒電夠唔夠力用到turbo功能?thx

如用nimh粒電這種, 理論上應沒問題, 不過具體還是要看你的電池規格, 因nimh電池品質也很参差的.

rc.explorer 發表於 2013-7-24 11:37
有喇, 請参考以下設定.

Beijing On Road Master 2013:

Modify Race:
TQ+A1: Fai Ho
He uses Plutonium V2 4.5T motor+ XPS Pro V1.2 Speed Control

登錄/註冊後可看大圖

SamsonSung 發表於 2013-9-12 11:55
WANT 早期的 V1.0 版本 70A, 13.5 JV SETTING PLEASE.

XPS Sport V1.1 +13.5T reference setting:
Forward Freq Level: 3
Drag Brake = 2%
Punch = 0
Start RPM: 4000
Power Band: 100%
Timing Burst: 80%
Timing Boost: 50%
Turbo Delay: 0.1s
Turbo Boost: 40

Plutonium V1 13.5T Motor  timing at 0 position, FDR start from 6.6

carrc 發表於 2013-9-14 18:28
XPS Sport V1.2 +8.5T Plutonium Combo JV setting?
Use Tamiya TT02 FDR?
Thx Team Powers

XPS Sport V1.2 reference setting with 8.5T PL motor:
Dead Band: 5
Forward Freq Level: 3
Punch = 10%
Start RPM: 5000
Power Band: 100%
Timing Burst: 80%
Timing Boost: 45%
Turbo Delay: 0.1s
Turbo Boost: 40

Plutonium 8.5T Motor timing at 0 position, FDR: start from 7.2

ter037 發表於 2013-9-17 10:35
想問下如果XPS Sport 70a插電冇反應。。。
但係用他錶度過焊洛底板正負極係有電到。。。
再用一個正常esc插 ...

這可能跟BEC 有零件壞了有關, 還是請寄回購買的模型店處理安排維修.

sai730 發表於 2013-9-26 23:45
XPS Sport V1.2 70a+6.5aT Plutonium Combo JV setting?Use Tamiya TT02 FDR?Thx

XPS Sport V1.2 reference setting with 6.5T PL motor:
Dead Band: 5
Forward Freq Level: 3
Punch = 10%
Start RPM: 5000
Power Band: 100%
Timing Burst: 80%
Timing Boost: 45%
Turbo Delay: 0.1s
Turbo Boost: 40

Plutonium 6.5T Motor timing at 0 position, FDR: start from 7.4 (if you find is not fast enough, you can keep gear up)

sai730 發表於 2013-10-14 20:53
求師兄打救！！

如你之前是可設定中位, 現在是不可以, 那可能訊號線部份的零件損壞了. 建議你可寄回本公司維修.
你有沒有郵件號以方便把維修地址發給你.

Monday 發表於 2013-10-14 23:27

XPS Pro V1.1 +21.5T reference setting:
Forward Freq Level: 3
Drag Brake =0%
Punch = 0
Start RPM: 5000
Power Band: 100%
Timing Burst: 75%
Timing Boost: 45%
Turbo Delay: 0.1s
Turbo Boost: 40
Plutonium 21.5T Motor  timing at -1 position, FDR = 3.4 (medium track, 但要注意因海綿胎直徑每一轉都有點不同, 所以這齒輪比要因應海綿胎直徑自己作調較一下)

monsterken 發表於 2013-12-1 17:43
剛係極速買左個新款140a電變
今日剛係橋底試，唔駛一排電
架車特然死左係度，

你可試下推一下馬達的同時再給油門睇下有沒反應, 如還是不能解決, 請你拿回極速,  本公司通知他換你一個新的.

rcman13 發表於 2013-12-2 21:16
吾好意思新手第一次不識口post，post左兩次

XPS Pro V1.2 +10.5T reference setting:
Forward Freq Level: 3
Drag Brake = 3%
Punch = 0
Start RPM: 4000
Power Band: 100%
Timing Burst: 80%
Timing Boost: 50%
Turbo Delay: 0.1s
Turbo Boost: 40
Plutonium V2 10.5T Motor  timing at 0 position, FDR = 7.8, original 12.3mm rotor

////////////////////////////////////////////////////////////////////////////////////////////////////
XPS Pro V1.2 +13.5T reference setting:
Forward Freq Level: 3
Drag Brake = 2%
Punch = 0
Start RPM: 4000
Power Band: 100%
Timing Burst: 80%
Timing Boost: 45%
Turbo Delay: 0.1s
Turbo Boost: 45

Plutonium V2 13.5T Motor  timing at 0 position, FDR = 6.8, original 12.3mm rotor

KCkennyChan 發表於 2014-2-25 20:54
1.2 140a ,13.5t non turbo JV setting ,thx ching

XPS Pro V1.2 +13.5T non boost(no turbo) setting:
Forward Freq Level: 2
Drag Brake = 3%
Punch = 30
Start RPM: 4000
Power Band: 100%
Timing Burst: 80%
Timing Boost: 0%
Turbo Delay: 0.1s
Turbo Boost: 0

Plutonium V2 13.5T Motor timing at +2 position, FDR = start from 4 with the use of 12.5mm ROAR Spec Rotor
You can adjust the timing to +4 position, but please monitor the temperature that should not over 85'C

鋒鋒鋒 發表於 2014-2-26 00:46
師兄能否提供維修地址，ESC遇到問題，希望能提供詳細檢查

建議你可交回你購買的模型店, 我們會再安排維修.

edmundkevin 發表於 2014-4-4 13:14
Please share 140a v1.2 for 17.5 Turbo TC. Thanks.

XPS Pro V1.2 +17.5T reference setting:
Forward Freq Level: 2
Drag Brake = 3%
Punch = 0
Start RPM: 4000
Power Band: 100%
Timing Burst: 80%
Timing Boost: 50%
Turbo Delay: 0.1s
Turbo Boost: 35%

Plutonium V2 17.5T Motor  timing at 0 position, FDR = start from 5.3 first

gos 發表於 2014-5-4 11:11
v1.2 xps pro 140a esc 壞左, 現在仲會唔會接受修理？

你可交回模型店, 我們會再回收然後安排維修.

Carkey2000 發表於 2014-5-15 22:05
新手問提 請問 XPS Sport V1.2 + 9.5T club racer brushless Turbo and Non turbo JV setting? Use Tamiya  ...

XPS Sport V1.2 +9.5T reference setting:
Forward Freq Level: 3
Drag Brake = 3%
Punch = 0
Start RPM: 5000
Power Band: 100%
Timing Burst: 80%
Timing Boost: 35%
Turbo Delay: 0.1s
Turbo Boost: 45%

Cup racer 9.5T Motor, FDR = 6.6

可建議先從這個設定開始:
XPS Sport V1.2 +13.5T reference setting:
Forward Freq Level: 3
Drag Brake = 6%
Punch = 15
Start RPM: 5000
Power Band: 100%
Timing Burst: 80%
Timing Boost: 40%
Turbo Delay: 0.1s
Turbo Boost: 40%

Cup racer 13.5T Motor, FDR = 6.4