M07 COPY 就快成功 ~

原帖由 教主 於 2008-9-21 01:20 發表

                               
登錄/註冊後可看大圖

is a 10 years old robitronic(?)
forget the name lu~~ ~

use parallel circuit for motor output ??.........

yes~ the most simple way

which shell you plan to use ??..........& how about the gear ratio ??......

[ 本帖最後由 minimini 於 2008-9-21 01:53 編輯 ]

原帖由 donaldt 於 2008-9-19 11:03 發表

                               
登錄/註冊後可看大圖

anyone think it is possible if I put 2 sets of Ho-Ying 13T
and use mixer to mix the 2 sets to go together??

it will be rocket fast

hey come here to make a list of order:
http://bbs.rc-evo.c ...

我反而有另外一個超級 crazy 諗法.........就係用一個無 sensor 線嘅電變 (譬如 120A 嗰隻).......將摩打線一開二咁去推兩個 3000kv 嘅摩打......咁樣唔知 work 唔 work 呢 ??.........

原帖由 minimini 於 2008-9-21 01:59 發表

                               
登錄/註冊後可看大圖

我反而有另外一個超級 crazy 諗法.........就係用一個無 sensor 線嘅電變 (譬如 120A 嗰隻).......將摩打線一開二咁去推兩個 3000kv 嘅摩打......咁樣唔知 work 唔 work 呢 ??.........

tell me if its work

原帖由 minimini 於 2008-9-21 01:52 發表

                               
登錄/註冊後可看大圖

which shell you plan to use ??..........& how about the gear ratio ??......

ratio is standard, F 20T and R 21T....is fast ~~
i guess mini cooper is the only choice for fun car ~~~

原帖由 教主 於 2008-9-21 02:12 發表

                               
登錄/註冊後可看大圖

ratio is standard, F 20T and R 21T....is fast ~~
i guess mini cooper is the only choice for fun car ~~~

that means the front & rear gear ratio still have a small difference wor........

yes. but it dosent effect much.
i test today. ball diff for front and rear , perform very well.
i say it even have the potential to race..........

原帖由 教主 於 2008-9-21 02:12 發表

                               
登錄/註冊後可看大圖

ratio is standard, F 20T and R 21T....is fast ~~
i guess mini cooper is the only choice for fun car ~~~

頭摩打齒可用 21T，初時會緊D，玩一排就會鬆，前後齒比相同。

袄G我又用21T拉

原帖由 li5115 於 2008-9-21 05:33 發表

                               
登錄/註冊後可看大圖

頭摩打齒可用 21T，初時會緊D，玩一排就會鬆，前後齒比相同。

用 21T - 頭波箱傳出 迫夾國消息

甘米好亲密？

now you guys can see the motor and wiring...
today i've try on the sandlot,
need more "droop" and more soft on sus;
and , proper tyre is a must

原帖由 教主 於 2008-9-22 02:55 發表

                               
登錄/註冊後可看大圖

now you guys can see the motor and wiring...
today i've try on the sandlot,
need more "droop" and more soft on sus;
and , proper tyre is a must

same gear ratio (F 20T, R 21T) ??.........

any overheat ??.......

原帖由 minimini 於 2008-9-22 02:59 發表

                               
登錄/註冊後可看大圖

same gear ratio (F 20T, R 21T) ??.........

any overheat ??.......

no no~ temperature normal;
still run on (F 20T, R 21T) ar~~~

i will try red spring again.....

原帖由 教主 於 2008-9-22 03:10 發表

                               
登錄/註冊後可看大圖

no no~ temperature normal;
still run on (F 20T, R 21T) ar~~~

i will try red spring again.....

that means if I plan to use M car wheels & tyres........I need to use a faster motor x 2 ??.........

that means you need a higher amp ESC

heres the side view~

http://hk.youtube.com/watch?v=gbih34OHI1g
test in wrong tyre
suspension too stiff

原帖由 教主 於 2008-9-22 04:34 發表

                               
登錄/註冊後可看大圖

http://hk.youtube.com/watch?v=gbih34OHI1g
test in wrong tyre
suspension too stiff

OMG.......直情係水上飄.........