LRP TC spec esc

在下買咗個LRP TC SPEC 配PRINCE MOTOR 23T BRUSHLESS, 但係就超難控制, 只係輕輕用手指摸住油門就已經BIU咗去, 令到想轉個正常D嘅彎都好難(簡直係冇可能玩得掂),一係就冇一係就狂到不得了..永冇中間..請問各位兄弟有冇解決嘅方法介紹吓..

您應該未set中位

原帖由 mk7023 於 2008-3-17 02:09 AM 發表

                               
登錄/註冊後可看大圖

在下買咗個LRP TC SPEC 配PRINCE MOTOR 23T BRUSHLESS, 但係就超難控制, 只係輕輕用手指摸住油門就已經BIU咗去, 令到想轉個正常D嘅彎都好難(簡直係冇可能玩得掂),一係就冇一係就狂到不得了..永冇中 ...

冇理由喎, lrp出名線性!

我qc2未set中位都係咁樣,我估BRUSHLESS都係一樣

yeah i knew that lrp is good linear that why i buy it, and i'd set that nature position.... but still have no idea about it..

1.LRP TC喺Mode 2裏面可以set profiles，有8個profiles，由smooth -> linear -> -> progressive -> aggressive。睇吓有冇揀錯profile。

2.check吓個控個throtle response/punch。

what's your final gear ratio for 23t bl motor? or I suggest u to try different type 23t bl to compare the throttle response.