新手上路 - RC GrassHopper

Hi all brother,

I have bought a new Grasshopper 1:10.  I have nearly finish all the modeling.

However I donno how to connect the eletrical part.  May I know how to do?

Receiver : Futaba R153F
Servo : Sanwa SRM-102
Motor : Bundled 380 Motor
ESC : TBU-101BK
Remote Control : Futaba 2PL-FM
Battery : Intellect NiMH 4600mAh
Charger : Not yet buy, any advise?

Thank you everyone for your help.  Please see the photo.

380摩打配4600電有排玩

原帖由 stevecyw 於 2008-3-12 00:49 發表

                               
登錄/註冊後可看大圖

Hi all brother,

I have bought a new Grasshopper 1:10.  I have nearly finish all the modeling.

However I donno how to connect the eletrical part.  May I know how to do?

Receiver : Futaba R153F ...

英文唔識睇 慘 今晚通渠夜唔夜

讓小弟幫你作簡單翻譯啦！！！希望大家可以幫到佢

Hi all brother,  
各位師兄，你們好：

I have bought a new Grasshopper 1:10.  I have nearly finish all the modeling.
我剛剛買了一部全新的Gresshopper，差不多砌完啦。

However I donno how to connect the eletrical part.  May I know how to do?
但是我不懂得如何去接通所有的電路，可不可以教教我？

Receiver (接收器): Futaba R153F
Servo (伺服器): Sanwa SRM-102
Motor (摩打): Bundled 380 Motor
ESC (電子變速): TBU-101BK
Remote Control (搖控): Futaba 2PL-FM
Battery (電): Intellect NiMH 4600mAh
Charger(差機) : Not yet buy, any advise?(還沒有買，可否給我一點意見？)

Thank you everyone for your help.  Please see the photo.
多謝各位的幫助，請看以下的照片：

原帖由 gordonf35 於 2008-3-12 05:06 發表

                               
登錄/註冊後可看大圖

讓小弟幫你作簡單翻譯啦！！！希望大家可以幫到佢

Hi all brother,  
各位師兄，你們好：

I have bought a new Grasshopper 1:10.  I have nearly finish all the modeling.
我剛剛買了一部全新的Gresshoppe ...

洗唔洗譯埋d model no.啊！

lol Wallace，睇怕都可能要
不過我自已就唔係好識答佢D問題，希望有人可以幫到佢

Dear brother?  Can any one help me ?

I already connect 摩打

There is 3 plug in the R153F 接收器, CH1. CH2, B/C, may I know what to plug in?

There is 2 cable from the TAMIYA TEU-101BK 電子變速, may I know where to plug that?  Thank you!

原帖由 stevecyw 於 2008-3-12 17:38 發表

                               
登錄/註冊後可看大圖

Dear brother?  Can any one help me ?

I already connect 摩打

There is 3 plug in the R153F 接收器, CH1. CH2, B/C, may I know what to plug in?

There is 2 cable from the TAMIYA TEU-101BK 電子變速 ...

Servo to Ch1, Esc(TEU1-1bk)　to Ch2, another one of plug from ESC（red in color , 2 pins）to B/C

Here is what you do....

1) Connect the servo plug into "CH1" on the receiver.
2) Connect the ESC plug into "CH2" on the receiver.  Red Plug into "B/C"
3) Insert Band Crystal into both receiver and remote.
4) Turn on Remote, then the switch that connects to the ESC and PARTY!!!  

Thank you very much.

The red pug from the ESC is 2 pin, but the B/C socket from the receiver has 3 pin, which pic should I insert?

Thanks again!

原帖由 stevecyw 於 2008-3-12 18:26 發表

                               
登錄/註冊後可看大圖

Thank you very much.

The red pug from the ESC is 2 pin, but the B/C socket from the receiver has 3 pin, which pic should I insert?

Thanks again!

Red plug(2 pin) is +(red) and -(black) , no signal , red/ black position is same as servo/ esc's plugs colume.

原帖由 gordonf35 於 2008-3-12 05:06 發表

                               
登錄/註冊後可看大圖

讓小弟幫你作簡單翻譯啦！！！希望大家可以幫到佢

Hi all brother,  
各位師兄，你們好：

I have bought a new Grasshopper 1:10.  I have nearly finish all the modeling.
我剛剛買了一部全新的Gresshoppe ...

好多謝好多謝你為我翻譯讓我看得明白QQQQQ

唔駛多謝 希望你可以幫到佢啦

Thank you Thank you Thank you

My grasshopper is moving now!!!

Thank you very much!

But the grasshopper is not my favourite

I will buy HotShot this week!  If I always play on-road, do you recommend to change the tire?

I will buy a 540 Sport Tune motor, metal bearing and new suspension for my new HotShot!

原帖由 stevecyw 於 2008-3-13 17:12 發表

                               
登錄/註冊後可看大圖

Thank you Thank you Thank you

My grasshopper is moving now!!!

Thank you very much!

But the grasshopper is not my favourite

I will buy HotShot this week!  If I always play on-road, do you r ...

Let's go to TKO and play together!!!!