大家不如post NT-1 D相離睇睇吖

my nt1 and 3R...hehe..sorry..it is R3...

copper receiver battery holder?

原帖由 RCwing 於 2008-3-10 17:30 發表

                               
登錄/註冊後可看大圖

my nt1 and 3R...hehe..sorry..it is R3...

架車好新淨喎..

原帖由 chrishkyung 於 2008-3-10 19:22 發表

                               
登錄/註冊後可看大圖

copper receiver battery holder?

咁都睇到

any difference between copper holder and plastic holder in ACO?

if the track is high traction, no harm to try..(not much difference to the original plastic or graphic)
if the track is low traction, suggest not to use...will make the car understeering...

ic ic thanks

it seems that copper battery holder only suitable to those chassis with traction roll problem...

原帖由 chrishkyung 於 2008-3-10 20:11 發表

                               
登錄/註冊後可看大圖

ic ic thanks

it seems that copper battery holder only suitable to those chassis with traction roll problem...

right.......but the best to solve the traction roll is small tires....no other alternative.....

原帖由 RCwing 於 2008-3-10 20:31 發表

                               
登錄/註冊後可看大圖

right.......but the best to solve the traction roll is small tires....no other alternative.....

how about the multiflex monoblock engine mount? is it of any use for traction roll?

no, it is only stiffness of chassis....

原帖由 RCwing 於 2008-3-10 05:30 PM 發表

                               
登錄/註冊後可看大圖

my nt1 and 3R...hehe..sorry..it is R3...

非常新,條油喉好似無反過咁

我又黎

原帖由 pui 於 2008-3-20 05:08 AM 發表

                               
登錄/註冊後可看大圖

我又黎

改咗唔少野wo
有無時間反車架

再嚟

原帖由 pui 於 2008-3-21 02:20 PM 發表

                               
登錄/註冊後可看大圖

再嚟

咁細張相點抄考呀咅少

                               
登錄/註冊後可看大圖

beautiful !

原帖由 pui 於 2008-3-20 05:08 發表

                               
登錄/註冊後可看大圖

我又黎

Very nice and beautiful and powerful car.

Are you Meen Vejrak...........

改咗唔少野wo