3 Racing NT1 頭單

有冇師兄用過?

okay 唔okay?

暫時未有不良報告...

係囉....

狗骨就有師兄話唔好滯.....

willing to pay for NT1 and high end engines, why not willing to pay for Xray multi one way diff ?

Xray craftmanshft is worth for $4XX la

yea....i guess...

but does any brother notice that X-ray front oneway being sold looks different from the one shown in X-ray's homepage?

the one shown in the homepage is silvery....but those being sold are like yellowish........

[ 本帖最後由 stanley_wwy 於 2007-12-6 17:44 編輯 ]

yellowish is spring steel which is good material should be stronger than those silver 7075 material

i mean the one-way tube.....not the outdrives wor.....

Better to buy x-ray one-way drive or you will throw money away on other after market generic ones. The original x-ray dog bone will wear out the generic drive cups on the one-way very quickly. If you use solid shaft setup it will wear even quickly only after 3 liters of fuel the dog bone was fine. Nearly screwed up the engine when the drive cup and the dog-bone lockup.

if you have the generic one-way tube already, just buy better brand drive cups, but it will require you to place some 6mm shims for the alignment.

thanks thanks....

that's what I concerned about.......those HUDY Spring Steel CVD are super strong.......killing the cups.....

你係話單向筒外面個層coating？．新一批貨至有．舊貨冇呢層coating．層coating有保護防刮花作用．早知佢會出就唔買住啦

係呀係呀......個筒呀...

咁即係銀色令身係coating, 定係黃黃地色果層先係?

因為我見 xray homepage 係銀色令身......d friend 用緊同kws 賣緊都係黃金金....好肉.

唔咁百分百話銀色身過啲貨冇做過處理（係铝制成品都會造氧化或電度處理）．但係黃咁咁過啲就多數係硬coating．有幾硬就唔知，通常用個銀仔刮佢應該唔會花，否則就dum囉

哦......ic......即係黃黃地色先係硬野.....哈