Twin Detonator 油壓

原帖由 dl7 於 2007-7-16 16:44 發表

                               
登錄/註冊後可看大圖

I found the GPM damper in ebay but cost $250 not include shipping.

                               
登錄/註冊後可看大圖

又或者平D $200內, 3Racing 嗰D又靚仔D, 都係KWS搵到...

The length of the damper should around ?mm

Thank you.

GPM Damper OK. I use on my Twin Detonator too.

[ 本帖最後由 li5115 於 2007-7-16 18:16 編輯 ]

li5115 ,
Where can I find your shell?
Anymore shell also suit for TD?

Thankyou!

原帖由 dl7 於 2007-7-16 20:47 發表

                               
登錄/註冊後可看大圖

li5115 ,
Where can I find your shell?
Anymore shell also suit for TD?

Thankyou!

It is a HPI body. I bought in Jet Hobby 6 months ago. No stock in this moment.

原帖由 li5115 於 2007-7-16 21:11 發表

                               
登錄/註冊後可看大圖

It is a HPI body. I bought in Jet Hobby 6 months ago. No stock in this moment.

Hi, you did a good modify on your TD! Would you mind open the shell, show us the chassic which parts you have change?

原帖由 bcgg 於 2007-7-17 17:15 發表

                               
登錄/註冊後可看大圖

Hi, you did a good modify on your TD! Would you mind open the shell, show us the chassic which parts you have change?

I just change the ESC (APEX), dampers and suspension arms.

原帖由 dl7 於 2007-7-16 20:47 發表

                               
登錄/註冊後可看大圖

li5115 ,
Where can I find your shell?
Anymore shell also suit for TD?

Thankyou!

Take a look here,
http://www.shopatron.com/index/137.0.22093.7259.0.0.0
http://www.hpiracing.com/hpibodies

Bro li5115 alway modify his car extensively and comperhensively.

P.S. my TD still uses the mechanical speed controller that the kit comes with.

原帖由 li5115 於 2007-7-17 18:54 發表

                               
登錄/註冊後可看大圖

I just change the ESC (APEX), dampers and suspension arms.

li5115, how much is the suspension arm? where to buy? GPM??

原帖由 bcgg 於 2007-7-16 17:21 發表

又或者平D $200內, 3Racing 嗰D又靚仔D, 都係KWS搵到...

If I want to buy 3Racing, when model I should buy?
Thank you.

Is that I can use the HPI shell after changing the suspension arm?

原帖由 bigben 於 2007-7-18 09:53 發表

                               
登錄/註冊後可看大圖

li5115, how much is the suspension arm? where to buy? GPM??

IN Hobby Hobby.$forgot.

原帖由 bcgg 於 2007-7-13 12:11 發表

                               
登錄/註冊後可看大圖

I modify my DT both front and rear the same.

                               
登錄/註冊後可看大圖

你好, bcgg 兄見到你改左個前後避震架加長左支避震, 我想問下個避震架o係邊度買同原本for 咩車用????如果我用本身個A臂唔係用你個短A臂又啱裝嗎?我都想加長個避震行程 thanks

[ 本帖最後由 tatame 於 2008-4-16 00:35 編輯 ]