Steering problems

Any brothers have the experience when the Front wheels are turning left or right, the Front Axle is making noise and Shaking up and down. Is that the problems from the drive shaft & Axle ??

[ 本帖最後由 raymen 於 2007-7-3 23:23 編輯 ]

轉用萬向會好好多架 (星黑色果隻喎)

原帖由 TOMY(HONG) 於 2007-7-2 07:50 PM 發表

                               
登錄/註冊後可看大圖

轉用萬向會好好多架 (星黑色果隻喎)

OH.. really, do U have this experience before? HOw come the size is not match ?

Why the 萬向 need the 黑色果隻 only? Whats the different between the siliver one?

THks......C.hing

[ 本帖最後由 raymen 於 2007-7-2 21:08 編輯 ]

That's a M03?  Yeah, 萬向 is a must, so as the ball diff.  I use 黑色果隻 (assembly universal) as well.  Siliver one seems to be old design...

原帖由 GigaRacer 於 2007-7-3 12:06 AM 發表

                               
登錄/註冊後可看大圖

That's a M03?  Yeah, 萬向 is a must, so as the ball diff.  I use 黑色果隻 (assembly universal) as well.  Siliver one seems to be old design...

That is M03R, how much is the Black assembly universial ?
thks...brother..

Which wheel base is the best performance? 210mm,225mm or 239mm?

I don't know how much in HK.

I use 210mm.  I think you can use either 210mm or 225mm.  Best performance depends on the track.  If more turns, shorter is better.  

One small tip: if the car flip over on the side, not 4wheel toward sky cup4, you can turn the wheels and give some gas, and it will flip back up by itself.  Try Try.

原帖由 GigaRacer 於 2007-7-3 02:33 AM 發表

                               
登錄/註冊後可看大圖

I don't know how much in HK.

I use 210mm.  I think you can use either 210mm or 225mm.  Best performance depends on the track.  If more turns, shorter is better.  

One small tip: if the car  ...

I check already today in KWS , no Tamiya universial sharft stock(Black), only 3 racing .
I like to use 210mm also

Tks for your help brother...

原帖由 raymen 於 2007-7-2 07:09 PM 發表

                               
登錄/註冊後可看大圖

Any brothers have the experience when the Front wheels are turning left or right, the Front Axle is making noise and Shaking up and down. Is that the problems from the drive shaft & Axle ??

I ask the shop which I brought from there , he said its Normal???

BUt no Tamiya Universial shaft stock, only 3-racing that one

I think it's ok to buy 3racing if you are not racing in TCS (require Tamiya parts only)