RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
樓主: bigben
打印 上一主題 下一主題
收起左側

(有相)今日終於買左Dark Impact.....

[複製鏈接]
21#
mark999hk 發表於 2007-5-11 10:11:01 | 只看該作者
原帖由 bigben 於 2007-5-11 10:06 AM 發表
mark999hk, do you find there is not enough spac for keeping all electronic device in the body of this car??? so packed.....


Yes, need to use the small size esc stuff~
22#
 樓主| bigben 發表於 2007-5-11 10:17:38 | 只看該作者
too packed for me.... the receiver need to install at the side of the servo .... as I afraid the ESC too heat...
23#
mark999hk 發表於 2007-5-11 10:19:11 | 只看該作者
原帖由 bigben 於 2007-5-11 10:17 AM 發表
too packed for me.... the receiver need to install at the side of the servo .... as I afraid the ESC too heat...


if you install like that~~~how is the balancing ar?
24#
 樓主| bigben 發表於 2007-5-11 10:28:15 | 只看該作者
no other means........

I use more than 3 hours to set up the receiver, ESC, the cable of motor and battery..... they are too packed and the cover can't fit in !!!! The heat sink touch the cable and the cable may smelt...... Also need some space for the heat sink of ESC to release heat .....

(Actually, the MC230 is small.... may be my receiver is a bit large...(the old fashion KO one)

so.....

[ 本帖最後由 bigben 於 2007-5-11 10:30 編輯 ]
25#
007 發表於 2007-5-11 12:16:48 | 只看該作者
Nice yellow colour wor. People use VSF1 for DF03 to fit the small compartment.
26#
RCman 發表於 2007-5-11 12:23:28 | 只看該作者
原帖由 007 於 2007-5-11 12:16 發表
Nice yellow colour wor. People use VSF1 for DF03 to fit the small compartment.


I use LRP "SR" esc, size is not small, but no motor limited
It can fit the bath-tube. But is set the ESC vertically
27#
 樓主| bigben 發表於 2007-5-11 12:26:50 | 只看該作者
All big brothers, where do you play buggy in HK?
28#
mark999hk 發表於 2007-5-11 12:28:00 | 只看該作者
原帖由 bigben 於 2007-5-11 12:26 PM 發表
All big brothers, where do you play buggy in HK?


TKO
29#
007 發表於 2007-5-11 12:29:40 | 只看該作者
RCman, I hope to test drive my Brat at TKO this Sunday too. Need to get a licence to play though.
30#
 樓主| bigben 發表於 2007-5-11 12:33:26 | 只看該作者
in which location in TKO?

If I am a newcomer only, with a simple car only..... accept me??

need to pay entrance fee?? how many guys there? any facilities to charge my battery there??
31#
RCman 發表於 2007-5-11 12:49:58 | 只看該作者
原帖由 007 於 2007-5-11 12:29 發表
RCman, I hope to test drive my Brat at TKO this Sunday too. Need to get a licence to play though.


I want to TKO play buggy too
My DF03 play @ Diamond hill once only
I hop-up a lot of parts now, need to test...........and want to test my modified Emaxx-truggy

I post my DF03 pics tonight for sharing
32#
007 發表於 2007-5-11 12:51:30 | 只看該作者
If you drive, go with the TKO Industrial Area sign and then turn right at TKO Fire station. And keep going straight after a traffic light and you will see a big open area on your left. That is where  you park your car and play. Free of charge.
33#
 樓主| bigben 發表於 2007-5-11 13:02:07 | 只看該作者
but I have no real car...
34#
rk2 發表於 2007-5-11 13:12:47 | 只看該作者
原帖由 mark999hk 於 2007-5-11 09:57 發表

But I think the mc230 is not enough for the 23T on this car~~coz I use 330 with 25T motor~~~the 330 is quite hot after played.  Just a comment.


Maybe you can add a fun will be ok


I think buggy need more torque than touring, so suggest to use smaller T in the pinion gear and may be the ESC will not be so hot. just a suggestion, not sure it really work.
35#
ryancmlam 發表於 2007-5-11 21:26:44 | 只看該作者
原帖由 bigben 於 2007-5-11 09:55 發表
<P>finished yesterday night !!!!</P>
<P>I use the colour Yellow, is it good??<IMG alt="<img" src="./images/smilies/biggrin.gif" border=0 smilieid=" ...


1. Yellow colour is nice and attractive. But I don't know whether yellow will be quite close to the color of the mud in TKO. At such, your car may not be easily identified.

2. There are a lot of "high hand" in TKO (Tseng Kwan O) industrial area outside the "Next Media" building. I have been there twice and learn a lot from them. (of couse, I am a "low hand" who havn't played RC for around than 15 yrs....)
36#
RCman 發表於 2007-5-12 00:37:20 | 只看該作者
BigSize LRP IPC series ESC

My Dark Impact DF03
and..I brough the Keen Hawk Shell, next time my DF03 called Keen Hawk
37#
 樓主| bigben 發表於 2007-5-12 01:19:40 | 只看該作者
<P>Great colour!!</P>
<P>how much is your parts A &amp; B ?<IMG alt="" src="http://bbs.rc-evo.com/images/smilies/smile.gif" border=0 smilieid="1"> </P>
38#
 樓主| bigben 發表於 2007-5-12 01:21:37 | 只看該作者
My car was crashed tonight.... right wheel hit the wall.....

The screw MA4 (9804200) and a part MD3 (51100) were lost , where can I buy them back??

thanks a lot!
39#
rk2 發表於 2007-5-12 09:14:39 | 只看該作者
原帖由 RCman 於 2007-5-12 00:37 發表
BigSize LRP IPC series ESC

My Dark Impact DF03
and..I brough the Keen Hawk Shell, next time my DF03 called Keen Hawk


I think if the window is left clear it would be better !! ( my view only)
40#
mark999hk 發表於 2007-5-12 09:17:43 | 只看該作者
原帖由 rk2 於 2007-5-11 01:12 PM 發表


I think buggy need more torque than touring, so suggest to use smaller T in the pinion gear and may be the ESC will not be so hot. just a suggestion, not sure it really work.


but I just use the org. gear ratio the "Big Teeth" is using the Tamiya option one

[ 本帖最後由 mark999hk 於 2007-5-12 09:19 編輯 ]
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-4-29 04:55 , Processed in 0.081861 second(s), 17 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表