how to low down the ride high?

How do people low down the front suspension? cut the spring?

Use low down spring. PNRacing has low down spring around HK$50

加介子都得ga

原帖由 Colin 於 2007-3-15 03:21 發表
加介子都得ga

加介子都要彈弓夠短

原帖由 guitarking 於 2007-3-15 02:20 發表
How do people low down the front suspension? cut the spring?

I guess the topic should be "How do people lower their cars' ride height?"

原帖由 guitarking 於 2007-3-15 02:20 發表
How do people low down the front suspension? cut the spring?

Whats your purpose for lowering the front suspension?

To lessen the spring travel??
To lower the front body?


my solution to the above issue would be..

To lessen the spring travel??
- cut the spring (will affects the springs original performance)
- use shorter spring (hopefully with lessen turns springs)


To lower the front body?
- modified the shell holder(即係條利), at the same time check if the front wheel will touch the fender when fully compressed the suspension, if it does, then you need to add spring travel limiter.

加介子係轉向杯下面都會影響spring本身的performance, 不過都係其中一個方法..


以上只係我既方法...

[ 本帖最後由 2slow 於 2007-3-15 11:39 編輯 ]

原帖由 2slow 於 2007-3-15 11:03 發表




Whats your purpose for lowering the front suspension?

To lessen the spring travel??
To lower the front body?

Probably both.

no shame to say that "I do that just for making it look good haha"...by the way how do u lower the back wheel?

原帖由 guitarking 於 2007-3-17 02:15 發表
no shame to say that "I do that just for making it look good haha"...by the way how do u lower the back wheel?

1. Certainly not for looking good. So I don't really understand what you said. Mix up the people here?

2. Practically the same way they are talking about (short springs and shims)

[ 本帖最後由 billy86che 於 2007-3-18 13:01 編輯 ]

原帖由 tonytjia@zone 於 2007-3-15 02:47 發表
Use low down spring. PNRacing has low down spring around HK$50

PN spring is good with slim