RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 1623|回復: 10
打印 上一主題 下一主題
收起左側

大家好!有野請教

[複製鏈接]
醫九 該用戶已被刪除
跳轉到指定樓層
1#
醫九 發表於 2007-3-7 00:15:45 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
我記得細過時見過人地玩油車,個哥哥仔係用一個好似磨機既電撻既,當佢撻著左架車之後,比油,架車係向後行!!

佢即刻熄車,再掉轉個電撻再撻過,嗯,比油又向反前行!

想問下 d 二沖程搖控車機器係咪可以兩邊都轉到架?
2#
pui 發表於 2007-3-7 00:36:11 | 只看該作者

                               
登錄/註冊後可看大圖
3#
andrewlio 發表於 2007-3-7 00:43:51 | 只看該作者
邊會向後行ga?
4#
NOKIA 發表於 2007-3-7 00:44:40 | 只看該作者
是的!我就是你說的那個哥哥仔
5#
DieselEngine 發表於 2007-3-7 01:02:57 | 只看該作者
原帖由 醫九 於 7/3/2007 12:15 AM 發表
我記得細過時見過人地玩油車,個哥哥仔係用一個好似磨機既電撻既,當佢撻著左架車之後,比油,架車係向後行!!

佢即刻熄車,再掉轉個電撻再撻過,嗯,比油又向反前行!

想問下 d 二沖程搖控車機器係咪可 ...

想問下 d 二沖程搖控車機器係咪可以兩邊都轉到架?
係.
醫九 該用戶已被刪除
6#
 樓主| 醫九 發表於 2007-3-7 01:14:53 | 只看該作者
原帖由 DieselEngine 於 2007-3-7 01:02 發表

想問下 d 二沖程搖控車機器係咪可以兩邊都轉到架?
係.


你認真答定係假答?我認真問的!

上面有人笑喎,唔知你地邊個真
7#
tungkee 發表於 2007-3-7 02:51:39 | 只看該作者
兩邊都著到 !!
醫九 該用戶已被刪除
8#
 樓主| 醫九 發表於 2007-3-7 10:48:09 | 只看該作者
原帖由 tungkee 於 2007-3-7 02:51 發表
兩邊都著到 !!


唔該晒
9#
python 發表於 2007-3-7 11:10:34 | 只看該作者
inside the crank shaft chamber, the port of air intake and air exhaust were built for one rotate direction, although the engine might run at both direction, the process of air intake and exhaust must be worse than normal runing, it may cause the damage of the linkage of piston and crank shaft, correct me if anything wrong.
10#
cowcowlee 發表於 2007-3-7 12:09:13 | 只看該作者
原帖由 python 於 2007-3-7 11:10 發表
inside the crank shaft chamber, the port of air intake and air exhaust were built for one rotate direction, although the engine might run at both direction, the process of air intake and exhaust mu ...


not quite a damage will be made but the performance became worse since the incorrect air intake timing...
11#
justinwan 發表於 2007-3-7 22:31:29 | 只看該作者
撻到ga.....but 架車後吾識行, 因為有單向....
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-5-5 20:16 , Processed in 0.033327 second(s), 16 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表