大家覺得fp2有無需要換這個?

大家覺得fp2有無需要換這個?
因為我托住電變果塊膠撞攔左，而家個電變只靠電線吊住
thx

有好有唔好.
好處冇咁易炒爛
唔係處係o的 設備難放~
買個新的原機身才 30幾蚊.
你自念~

原帖由 小步 於 2007-2-22 21:05 發表
有好有唔好.
好處冇咁易炒爛
唔係處係o的 設備難放~
買個新的原機身才 30幾蚊.
你自念~

我係廣華街問過，如果砌返成個原裝機身都成2xx......
其實托住電變果舊膠攔左，如果換返原廠parts要買d嘜呢?
thx

最重要一樣野，對一個完全未砌過電直既人，裝呢個野有無難度先?

原裝機架連尾管我到才$49.-

換了這個架後會唔會很重, 原裝 motor + 7.4 V li-po 電飛唔起 ?

未試過用7.4v 飛呢個 架.....
不如你問下老細好過
http://www.hiphingashtray.com.hk ... forums.cgi?forum=19

虛榮多於一切!
我都起度裝緊.... 好虛榮呀!

抵唔抵真係見人見至,原裝有個位係好易爛,換左呢隻就真係襟炒好多,同埋靚左囉.7.4v應該飛唔到,我地未試過,因為淨係計重量就知7.4v就算得都唔好飛,建議用11.1v,以而家無刷電變摩打鋰電既能力,呢個重量一定無問題.

Sorry to use English because I don't have a Chinese input device.

I am sure if I use 7.4V lipo it will not fly. Because my FP do not fly well with 7.4 V lipo even though I just install a M24 blade.

I am thinking of buying this chassis and upgrade my FP to brushless system and use 11.1 V lipo. I have a 450TH motor, Can I use it with 10T pinion gear ?

I am planning to use GWS CN12 rudder motor, but afraid of overheat. Is it possible also to install a brushless rudder motor at the back ?

Thanks.

M24 槳用11.1v 都唔好飛得去邊... 只係 為了 打槳唔易斷
7.4v 用m24 9成飛唔起啦.