sensor 線問題

請問師兄們如果個摩打突然停咗，之後張條sensor線抜掉，個摩打又行得番。再張條sensor插番去摩打又唔work！(sensor is new)
咁樣請問是個摩打有問題定還是個ESC 有問題呢？（ESC is new）

ESC 入左sensorless mode, reset返個ESC試下

When you plug the sensor cable. The ESC will automatically operate in sensor mode. It is better to change another sensor cable to see whether it can be fix or not. If it can fix, then the problem is the sensor cable. If it cannot fix, change to another normal motor. If it can fix, then the sensor board inside the motor had problem. It will easily find cold joint in the sensor board. If you had solder iron with enough power ( above 80W ), you can try to re-solder all the solder joint to see whether you can fix the problem. Otherwise, you need to change the sensor board.

你睇吓嗰啲電線是否焊得唔好(電變及摩打)假焊唔夠過電！玩鬆咗

Thanks bros , I try try testing first!