想買美國坦克

不知什麼原因，我之前發的帖子不能回帖，要另開帖子
想买这辆坦克 ,http://www.rcarmory.com/kit_tiger1.html#Options_drive ,  有几个问题请教
1  用边款电变好 ?
2 除左車架, 电变, radio, 還要買什麼才能玩這坦克?

下面个d系唛喏泥? 謝各師兄 !!
Drive System (Motors, Chains, Sprockets, and Mounting Hardware)....................$475.00
Turret Drive (Motors, Pinion Gear, Drive Plate, and Motor Mount).........................$135.00
Gun Elevation Drive (Motor, and Hardware)........................................................$70.00

4PL唔夠位用，6—8channel.

16vale 發表於 2012-9-24 22:52

                               
登錄/註冊後可看大圖

4PL唔夠位用，6—8channel.

點解介紹話用4 chennel 就ok ?
Construction:

The averaged experienced modeler should be able to assemble the Tiger 1 kit in about 100 hours. Like the King Tiger some modelers have built the kit in much less time but most spend extra time adding many of the fine details found on tanks during combat. Expect to spend an additional 25 hours to paint the kit. Only basic hand tools are required to assemble the tank. Items such as paint, batteries, battery charger, radio equipment (4 channel ), and speed controllers are not included with the kit.

You can use a stick 4-channel remote control but not 4PL

zeda 發表於 2012-9-25 21:14

                               
登錄/註冊後可看大圖

You can use a stick 4-channel remote control but not 4PL

边款 stick 4-channel 啱装 ? 是不是大部份 stick 4-channel 都可以 ?

佢咁講即係 4YF 都 ok，其實師兄所講 6-8 ch 係預左你未來加工能，加 servo 用的。另外佢啲價係一套套組模咁標價，其實要齊功能你差唔多要加哂咁多價就知。

rc-driver 發表於 2012-9-25 23:39

                               
登錄/註冊後可看大圖

边款 stick 4-channel 啱装 ? 是不是大部份 stick 4-channel 都可以 ?

futaba ex6, 6J  等都ok

睇左個網, 整車要加哂下面既銀碼! 未計 SHIPPING ~
Price............................................................................................................$1,875.00

Options:

Drive System (Motors, Chains, Sprockets, and Mounting Hardware)....................$475.00
Turret Drive (Motors, Pinion Gear, Drive Plate, and Motor Mount).........................$135.00
Gun Elevation Drive (Motor, and Hardware)........................................................$70.00

兩皮幾？……

買部1/10全金屬好似都唔差幾多- -

my 1/10 tiger1 is for sale

askalaw 發表於 2012-9-26 12:28

                               
登錄/註冊後可看大圖

佢咁講即係 4YF 都 ok，其實師兄所講 6-8 ch 係預左你未來加工能，加 servo 用的。另外佢啲價係一套套組模 ...

電變邊款好，香港有得賣?

lozter5228 發表於 2012-9-26 21:42

                               
登錄/註冊後可看大圖

買部1/10全金屬好似都唔差幾多- -

國産1/10全金屬是不是買翻黎重有排搞 ? 又不知這輛老國貨質素好不好 !!

tiger1 發表於 2012-9-26 22:30

                               
登錄/註冊後可看大圖

my 1/10 tiger1 is for sale

Please pm details

rc-driver 發表於 2012-9-26 23:05

                               
登錄/註冊後可看大圖

國産1/10全金屬是不是買翻黎重有排搞 ? 又不知這輛老國貨質素好不好 !!

又唔可以視所有強國貨都係差既, 人係識進步. 產品一樣會改善.
就好似國內一家做 1/6 全金屬都做得出名, 香港都有幾位師兄有.
至於買返來係咪仲有排攪我反而覺得要睇玩既人多過架車本身質數...

玩坦克樂趣在於多野搞 DIY

其實睇自己既要求... 有人買返離落地就玩 ,有人鐘意改疑真改金屬件 ... 有人要求高操縱細節..

I have a king tiger from RCarmory. The tank is good. If you don't mind that ir is made of special PVC material called Sentra. The King tiger details are very good. I know that the designer measured all the parts at Patton Museum in Kentucky. I went there once with my wife. I wanted to measure the dimensions of the king tiger tank, but my wife did not want to stay at all.

I have armortek tanks and metalbox panzer 3.

Bryan