Where can I buy this servo??

各位知唔知呢隻servo邊度有得賣呀

呢到有 80$有交易 http://10000fun.com/
你可以直接打比果個eric 同佢約時間係mtr 交易  時間就唔知啦 你同佢自己約嫁啦

[ 本帖最後由 iCoke 於 2006-11-1 00:59 編輯 ]

原帖由 iCoke 於 2006-11-1 00:58 發表
呢到有 80$有交易 http://10000fun.com/
你可以直接打比果個eric 同佢約時間係mtr 交易  時間就唔知啦 你同佢自己約嫁啦

Many thanks brother

原帖由 valklai 於 2006-11-1 00:50 發表
各位知唔知呢隻servo邊度有得賣呀

Is it good servo!!!!!

唔知有冇人用過? work 唔 work?

This servo is relatively good given its cost is cheap. It has quite a noticable torque (probably around 8-9kg according to spec)...but the speed is really the cons of this servo.

Its slow......if you flight the switch from left to right servo time, it will not follow and start going nuts.....but if you gently turn the steering...it works fine....

It will be best to use it on something not require for speed,...but more on torque

ICIC, thanks bro montoya

呢隻sevor 撞手神啦 我買左3隻 1隻玩幾玩就神左 轉果時達達聲跳跳下 冇掃野嫁 都唔知做乜 果2隻都仲未有咩事 呢隻sevor 係唔好在回中果隻個回彈力好勁 攪到fing fing下咁 不過係離地冇左力果時~ 落左地都冇乜野 都好好力  呢隻野我冇當佢係大力sevor 嫁 我當係係d原裝sevor咋 因為80$

原帖由 jpmontoya2 於 2006-11-1 12:12 發表
This servo is relatively good given its cost is cheap. It has quite a noticable torque (probably around 8-9kg according to spec)...but the speed is really the cons of this servo.

Its slow......i ...

man...i dis-assembled it because it was too loud and when i re-assembled it, it went nuts but other bros use it and they say its good for bashing/normal use so it should be ok

I hv 2 of them and still using it. For me its so good.  cheap & reliable