RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
樓主: hobbyhobby
收起左側

Axial Wraith

[複製鏈接]
 樓主| hobbyhobby 發表於 2012-4-18 16:41:36 | 顯示全部樓層

                               
登錄/註冊後可看大圖
SCP125R
Unibody SHD Differential Lock AX10 Hot Racing Unibody Super Heavy Axial Heavy Duty Differential Locker.
FEATURES:


Steel construction
YOU WILL RECEIVE:

heavy duty differential locker (does not comes with gear)
four mounting screw
REQUIREMENTS:



 樓主| hobbyhobby 發表於 2012-4-18 16:42:08 | 顯示全部樓層

                               
登錄/註冊後可看大圖
WRA12C05
Axle Diff. Cover Green Wraith (2)Ridgecrest
This is the optional Hot Racing alum Diff Gear Cover for the Wraith, Righecrest

FEATURES:


alum construction
Green in color
YOU WILL RECEIVE:

Two alum Gear Cover
Eight stainless steel screws
REQUIREMENTS:


Installation on the vehicle
SPECIFICATIONS:


length: 43 mm
width: 41mm
height: 13mm
COMMENTS:


 樓主| hobbyhobby 發表於 2012-4-18 16:42:47 | 顯示全部樓層

                               
登錄/註冊後可看大圖
WRA12C08
Axle Diff. Cover Silver Wraith (2) Ridgecrest This is the optional Hot Racing alum Diff Gear Cover for the Wraith, Righecrest

FEATURES:



alum construction
Silver in color

YOU WILL RECEIVE:


Two alum Gear Cover
Eight stainless steel screws

REQUIREMENTS:



Installation on the vehicle

SPECIFICATIONS:



length: 43 mm
width: 41mm
height: 13mm


 樓主| hobbyhobby 發表於 2012-4-18 16:43:17 | 顯示全部樓層

                               
登錄/註冊後可看大圖
WRA12A01
Axle Lower Shock Mount (2) Wraith Righecrest This is the Axle Lower shock mount from Hot Racing For Wraith, Righecrest
FEATURES:


CNC 6061-T6 Aluminum construction, Black in color
YOU WILL RECEIVE:

One left One Right Axle Lower shock mount
Four mounting screw and washer
REQUIREMENTS:


Installation to the model

 樓主| hobbyhobby 發表於 2012-4-18 16:43:46 | 顯示全部樓層

                               
登錄/註冊後可看大圖
SCP2401
Black Alum. Servo Mount Ax10 Wraith Righecrest This is the CNC 6061 Aluminum Servo Mount for the AX10 Wraith, Righecrest
chassis kits.
FEATURES:


CNC Constructed of aluminum, anodized Black in color
Provides strong secure servo attachment
YOU WILL RECEIVE:

Two sections Hot Racing Aluminum Servo Mount
Four 3x8 flat head servo mount screw
Four 3MM Countersunk Washer Green
REQUIREMENTS:


Removing stock servo mount
 樓主| hobbyhobby 發表於 2012-4-18 16:44:16 | 顯示全部樓層

                               
登錄/註冊後可看大圖
SCP2405
Green Alum. Servo Mount AX10 Wraith Ridgecrest This is the CNC 6061 Aluminum Servo Mount for the AX10 Wraith, Righecrest
chassis kits.
FEATURES:


CNC Constructed of aluminum, anodized Green in color
Provides strong secure servo attachment
YOU WILL RECEIVE:

Two sections Hot Racing Aluminum Servo Mount
Four 3x8 flat head servo mount screw
Four 3MM Countersunk Washer Green
REQUIREMENTS:


Removing stock servo mount
 樓主| hobbyhobby 發表於 2012-4-18 16:44:52 | 顯示全部樓層

                               
登錄/註冊後可看大圖
WRA55L01
Lower CNC Alum. Ladder Bar Wraith Righecrest These are the optional Hot Racing Lower Suspension Ladder Bar
use on the Axial Wraith, Righecrest Vehicles.
FEATURES:


Aluminum construction Anodized Black in color
YOU WILL RECEIVE:

Two Lower CNC Alum. ladder Bar with ball end
REQUIREMENTS:


Installation on the vehicle
SPECIFICATIONS:


length: 135mm (5.3") width: 6mm (0.24")
COMMENTS:


Also available Upper Ladder Bar (Wra55U01)
 樓主| hobbyhobby 發表於 2012-4-18 16:45:30 | 顯示全部樓層

                               
登錄/註冊後可看大圖
WRA55U01
Upper CNC Alum. Ladder Bar Wraith Righecrest
These are the optional Hot Racing Upper Suspension Ladder Bar
use on the Axial Wraith, Righecrest Vehicles.

FEATURES:


Aluminum construction Anodized Black in color
YOU WILL RECEIVE:

Two Upper CNC Alum. ladder Bar with ball end
REQUIREMENTS:


Installation on the vehicle
SPECIFICATIONS:


length: 135mm (5.3") width: 6mm (0.24")
COMMENTS:


Also available Lower Ladder Bar (Wra55L01)
 樓主| hobbyhobby 發表於 2012-4-18 16:46:28 | 顯示全部樓層

                               
登錄/註冊後可看大圖
AXR1901
Black Alum. C-Hub XR10 WRA This is an Aluminum Added Castor c-hub Carrier for the XR10
FEATURES:


Added castor angle for improve driveshaft angle.
and stock castor setting.
CNC 6061-T6 aluminum construction.
Anodized Black with CNC engraved silver lining
YOU WILL RECEIVE:

Two Aluminum c-hub carriers.
Four 3x8mm speical king pin screw (RSCP19x)
REQUIREMENTS:


Assembly on vehicle.
SPECIFICATIONS:


length: 24.25mm
width: 19.57
height: 23.81mm
 樓主| hobbyhobby 發表於 2012-4-18 16:46:56 | 顯示全部樓層

                               
登錄/註冊後可看大圖
AXR2101
Alum HT Steering Knuckle XR10 Wraith These are optional CNC-machined aluminum front knuckle arms for
the XR10 or Wraith
FEATURES:


High Leverage position single steering arm for Max Power Steering.
CNC-milled 6061 aluminum construction.
Anodized Black with CNC engraved silver lining
YOU WILL RECEIVE:

Two front knuckle arms.
with Max Power Steering
REQUIREMENTS:


Assembly on vehicle.
SPECIFICATIONS:


length: 38.44 mm
height: 31.36 mm

 樓主| hobbyhobby 發表於 2012-4-18 16:47:25 | 顯示全部樓層

                               
登錄/註冊後可看大圖
WRA21M01
Alum HC Steering Knuckle Wraith Righecrest These are optional CNC-machined aluminum front knuckle arms for
the Wraith, Righecrest
FEATURES:


High mount position steering arm for Max Steering.
CNC-milled 6061 aluminum construction.
Anodized Black with CNC engraved silver lining
YOU WILL RECEIVE:

Two front knuckle arms.
REQUIREMENTS:


Assembly on vehicle.
SPECIFICATIONS:


length: 38.44 mm
height: 31.36 mm
COMMENTS:



 樓主| hobbyhobby 發表於 2012-4-18 16:47:54 | 顯示全部樓層

                               
登錄/註冊後可看大圖
WRA2201
Rear Axle Alum. Adapter Wraith Righecrest Hot Racing REAR AXLE Hub for Wraith, Righecrest
FEATURES:


Aluminum lockouts are made of strong lightweight 6061 aluminum
Anodized black with a laser etched
YOU WILL RECEIVE:

Two Aluminum Rear Axle Lockout.
Four 3x8mm Flat head screw
 樓主| hobbyhobby 發表於 2012-4-18 16:48:27 | 顯示全部樓層

                               
登錄/註冊後可看大圖
AXR70FS148
Linear rate Rock Crawler Soft Spring set XR10
This is the optional Linear rate Shock Spring Set for XR10 Rock Crawler Shock
FEATURES:

Sodt Linear rate Springs, allow the optimum Max compression spring rate for each application. These Linear rate springs are soft to allow Max articulation, and Give it a low Low CG to resist rollover. YOU WILL RECEIVE:
Soft Two 1.0 mm wire (Gold in color) (Rate 1.4) Ex- Soft Two 0.9mm wire (Silver in color). Ultra-soft Two 0.8mm wire (Black in color). REQUIREMENTS:

The springs must be installed onto the built shock. SPECIFICATIONS:

length: 2.75" (70mm) diameter: 0.55" (14mm) Gold Compression Rate: 1.40lbs/in Silver Compression Rate: 0.9lbs/in Black Compression Rate: .6lbs/in
 樓主| hobbyhobby 發表於 2012-4-18 16:49:01 | 顯示全部樓層

                               
登錄/註冊後可看大圖
WRA311X01
Full Set Sway Bar Kit Wraith Rock Racer This is an Hot Racing Front and Rear Sway Bar Set for use on the Wraith Rock Racer Trucks.



FEATURES:


Three different stiffness options Sway Bar, allows driver to vary stiffness for track conditions

Three different mounting position, allows driver to vary application point on the lever. arm.


YOU WILL RECEIVE:

Two 2.5mm Spring steel bar with 20mm slot cut (soft)
Two 2.5mm Spring steel bars with 10mm slot cut (medium)
Two 2.5mm spring steel bars with no slot cut (firm)
Four CNC Black Aluminum lever arm
Four Balllink with cup.
Eight 4.7 ball
Four Durlin wire spacer
Mounting hardware


 樓主| hobbyhobby 發表於 2012-4-18 16:49:43 | 顯示全部樓層

                               
登錄/註冊後可看大圖
SWRA288
Steel CVD RC Shaft Wraith Righecrest
This is the Universal Rock crawler CV Set for the Axial Wraith, Righecrest

FEATURES:

#45 steel Steel construction, Harden to a jet black finish
YOU WILL RECEIVE:
Two Dogbones, two Axles, two 2x10mm Axle Pins, two 3.2 x7mm Pins and
two 12.8mm diameter spacers
REQUIREMENTS:

Installation between diff and wheel hubs
SPECIFICATIONS:

length: 123mm 70mm
Shaft diameter: 4mm (0.16")
 樓主| hobbyhobby 發表於 2012-4-18 16:50:17 | 顯示全部樓層

                               
登錄/註冊後可看大圖
WRA331X08
Stainless Skid Plate Bumper Wraith Righecrest

The ultimate in front protection from damage from any rock strikes. FEATURES:



Formed from a single piece of 0, 6mm Stainless steel plate. It fit over the front Axle and servo. it absorbs impacts and protect the whole steering system

Tough stainless steel Shiny finish.

Just bolt on No drilling required to install
YOU WILL RECEIVE:
One Shiny Stainless Steel Skid Plate Bumper.
four mount and hardware.


REQUIREMENTS:


Some bending to form the set up of the skid plat for
Installation

 樓主| hobbyhobby 發表於 2012-4-18 16:50:51 | 顯示全部樓層

                               
登錄/註冊後可看大圖
SCP1801
Black Heat sink Motor plate AX10 This is the Optional heat sink Motor Mount for the AX10 Scorpion .
This Mount holds the motors and gearbox assembly.
FEATURES:


CNC Constructed of Black anodized aluminum
With cooling fins to help dissipate heat.
A bottom anchor M3 screw mount to give it a better gear alignment.
YOU WILL RECEIVE:

One Optional heat sink Motor Mount
REQUIREMENTS:


Attaching motors and gearbox assembly
SPECIFICATIONS:


width: At widest point
height:
Thickness:
Length of screw hole for motor adjustment:
COMMENTS:


Best Use with SCP1501
 樓主| hobbyhobby 發表於 2012-4-18 16:51:21 | 顯示全部樓層

                               
登錄/註冊後可看大圖
SCP1805
Green Heat sink Motor plate Ax10
This is the Optional heat sink Motor Mount for the AX10 Scorpion .
This Mount holds the motors and gearbox assembly.

FEATURES:


CNC Constructed of Green anodized aluminum
With cooling fins to help dissipate heat.
A bottom anchor M3 screw mount to give it a better gear alignment.
YOU WILL RECEIVE:

One Optional heat sink Motor Mount
REQUIREMENTS:


Attaching motors and gearbox assembly
SPECIFICATIONS:


width: At widest point
height:
Thickness:
Length of screw hole for motor adjustment:
COMMENTS:


Best use with SCP1501
 樓主| hobbyhobby 發表於 2012-4-18 16:51:54 | 顯示全部樓層

                               
登錄/註冊後可看大圖
SCP1001
Black 12mm hex wheel hub WK Ax10 Wraith Aluminum Hex Hub 12mm for use with the HPI MT MT2, Wheely King, Firestome. and Axial Scorpion AX10, Wraith XR10, Ridgecrest AX10
FEATURES:


Aluminum Construction.
Anodized Black in Color.
CNC Machined.
Secured with 2mm Cap Head Screw.
YOU WILL RECEIVE:

Four Aluminum 12mm Hex Hubs.
Four 2mm x 5mm Cap Head Hex Screws. es.
 樓主| hobbyhobby 發表於 2012-4-18 16:52:22 | 顯示全部樓層

                               
登錄/註冊後可看大圖
SCP1002
Alum. 12mm hex wheel hub WK Ax10 Wraith
Aluminum Hex Hub 12mm for use with the HPI MT MT2, Wheely King, Firestome. and Axial Scorpion AX10, Wraith XR10, Ridgecrest AX10
FEATURES:


Aluminum Construction.
Anodized Red in Color.
CNC Machined.
Secured with 2mm Cap Head Screw.
YOU WILL RECEIVE:

Four Aluminum 12mm Hex Hubs.
Four 2mm x 5mm Cap Head Hex Screws. es.
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2021-4-22 07:11 , Processed in 0.038906 second(s), 14 queries , Gzip On.

Powered by Discuz! X3.2

JKNET CDN | © 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表