12 仔問題

本人係新手, 有以下問題向各位請教:
1) top, xray, crc , serpent, 邊架12仔易操控? PARTS 邊架齊全?
2) 如玩1 CELL, 幾多TURN 馬達較多人用? 如買LRP X12 馬達, OCTA WIND 定舊款比較好用?
3) 好盈 電變 定LRP version 2 好用?
4) 如玩1 CELL, 電變要不要換3.7V 電容 ?
5) 胎方面, SPEEDＭＩＮＤ　十二仔胎好用嗎？咩度數好行?

好多問題, 請勿見怪...THANKS.

ＴＨＡＮＫＳ。

Amy 你都係新手?

12仔係新手 ma c hing ...........各位請指教

[email protected] 發表於 2011-5-15 02:02

                               
登錄/註冊後可看大圖

本人係新手, 有以下問題向各位請教:
1) top, xray, crc , serpent, 邊架12仔易操控? PARTS 邊架齊全?
2)  ...

My opinion below:

1) All 12仔 are similar, so all are 易控 if setup correctly.  Parts 齊全: TOP>CRC>Xray>Serpent
2) 1Cell + 3.5R or 4.0R,  LRP is a good choice.  Octa la, updated model ma.
3) 好盈 1S is good.  Lots of fine details/settings using program box, and is cheaper.
4) no la to change cap
5) Speedmind, ok la. Better choice is Jaco, best choice is CRC!  Try F37/R35 to start. (depends on where you place)

回復 hardmankam 的帖子

C hing, many thanks for your useful opinion.

One more question. If I install AMB in 1/12 pan car, do I need to install / connect an additional capacitor to receiver. ? Thanks.

All 1s esc has an internal booster that boosts 3.7 v to 6v for the receiver and servo. So your amb can plug into receiver to get battery without problems. I don't think u need the cap.

[email protected] 發表於 2011-5-16 10:29

                               
登錄/註冊後可看大圖

回復 hardmankam 的帖子

C hing, many thanks for your useful opinion.

CHING,
For your reference~
http://bbs.rc-evo.com/forum.php? ... &extra=page%3D1

Lung1 C-hing... How many uF is your receiver cap?

我都想知呀??