PRO-TEN 專區

回復 59# kamlo713


    Hi Ching, what motor turn are you using? Are you using 2S-lipo? Thanks ^^

I have a CRC gen-X with 235mm kit put together 7 months ago, but I still haven't put it on the ground....

I will test it on the coming week in JV (and that will be my first time there), hopefully it will not fallen apart...

I have a CRC gen-X with 235mm kit put together 7 months ago, but I still haven't put it on the groun ...
iggihk 發表於 2010-12-30 16:18

                               
登錄/註冊後可看大圖

hi ching...when will you go to play that 235 CRC...my friend also play 235 but a vintage trinitry.....yours may play together la...
we plan play on coming sat morning 1/1/11 around 10am ....welcome to join us ....

回復 62# iggihk

Great! Would you mind showing us the picture of your car? Thanks ^^

are most of the pan car now 200mm width ? does any brand still produce 235 mm width pro 10?
i personally think a pro 10 should has a wide rear wheel width.

回復 65# airyu

Nowadays, 1/10 pan car are generally of 200mm.
If you want to play 235mm chassis, you may consider CRC GEN-X10LE together with its 235mm conversion kit. ^^
http://www.teamcrc.com/crc/modul ... order=0&thold=0

are most of the pan car now 200mm width ? does any brand still produce 235 mm width pro 10?
i pers ...
airyu 發表於 2011-1-5 23:46

                               
登錄/註冊後可看大圖

yes...you are right..some ching said before
1/10 200mm pan car named as Pan car
but 1/10 235mm size then named as a PRO ten

but we normal like to say this kind of car is a pro ten then.....

我都係CRC加咗235套kit, 但都未落過地

回復 69# raman9551


My friends and I will play pan car (200mm and 235mm) on this SAT morning

Would like to ask those Ching who had played Protoform P905B shell.

Is the rear end plates included? Or need DIY from the lexan off-cut ?

                               
登錄/註冊後可看大圖

Please advise ^^

235mm conversion kit for XRAY X10 ^^

                               
登錄/註冊後可看大圖

http://www.redrc.net/2011/01/nit ... 5mm-conversion-kit/

回復 72# mikuro

回復 72# mikuro

oo,, good news for pro 10 fans

回復 74# airyu

Unless you really want to play with X10, this conversion kit is not cheap (90 EUR) >_<

Ching 們 crc頭上A臂好緊！應該點做？thx

回復 76# 蛇打七吋


    我亦發現同一問題、但昨天試車走了幾後沒什麼大問題！

回復 77# raymomo


   CRC LE right?

回復 78# 3rock3rock


    Yes! Crc le and would u mind suggest the gear ratio if I using the 48pitch spur with8.5 turn turbo? Haha thanks Nelson !

回復 77# raymomo


    Hi Ray 兄, can you show me some pictures on your X10 LE? Thanks ^^