如果差完電唔玩有無事ka?

回復 17# q太郎.

Most low discharge (C) battery is recommand to change at 1C by manufacture.  so 10,000mah is recommand to charge at 10A.  For high discharge battery 50-60C it is recomand to change at 1-2C.  The limit is as high as 5C for ｓｏｍｅ　ｂｒａｎｄｓ.  LRP recommand to change normal 2S　５０００－６０００ｍａｈ　ｌｉｐｏ　ａｔ　１０Ａ and 1S 1/12 battery at 8A。　　Ｂｕｔ　ｒｅｍｅｍｂｅｒ　ｄｏｎ’ｔ　ｔｒｙ　ｉｔ　ｗｉｈｔ　ａｎｙｔｈｉｎｇ　ｌｏｗｅｒ　ｔｈａｎ　５０Ｃ　。　

LRP recommand to change normal 2S　５０００－６０００ｍａｈ　ｌｉｐｏ　ａｔ　１０Ａ and 1S 1/12 battery at 8A。

is that true !?

回復 22# sunday

Hi Sunday hing:  Read the manual below, last page recommended charge currents close to the end.    As I said don't try it with low C batteries.  

http://www.lrp.cc/fileadmin/lrp_ ... ouch-e-100730fv.pdf

WELL, HOPE EVERY NEW GUY READ THE WHOLE ARTICLE INSTEAD OF THE WORD " 10A "

Well, I stated there as well.  "Ｂｕｔ　ｒｅｍｅｍｂｅｒ　ｄｏｎ’ｔ　ｔｒｙ　ｉｔ　ｗｉｈｔ　ａｎｙｔｈｉｎｇ　ｌｏｗｅｒ　ｔｈａｎ　５０Ｃ　。"  If Sunday Hing like to read half of it I have nothing to say la......　

SMC instruction sheet, also mention, 2C to charge is acceptable. As i know a lot of people included myself is using 10A to charge 50C. And some will even use high V to charge it to 4.22-4.23v. After 3-4 months of usage, my SMC battery still keep very flat.

The key is to run it fo 6-7mins, stop playing at around 3.8/cell, let it cool down for another charge cycle.

SMC instruction sheet, also mention, 2C to charge is acceptable. As i know a lot of people included  ...
hk_sdu 發表於 25/10/2010 01:19 PM

                               
登錄/註冊後可看大圖

我用IP 35C電用10A 差仲要高volt (8.5v)差到玩左成年d電都未漲..  
我自已覺得漲既原因係:
1. 過放 (底過3.0v /cell)
2. 差滿隔左好耐都唔玩
3. 2cells 差既時候唔平衡

If Sunday Hing like to read half of it I have nothing to say la......　jf813 發表於 2010-10-25 12:33

                               
登錄/註冊後可看大圖

i dont read, i knew it.
just make sure those new guy wont mess up

AOK

死啦.....全英文答唔到嘴

回復 28# sunday

Forget it-------------......