大家通常用咩膠紙 masking 架?

我就用 平價 縐紋膠  不過有時會有d 漏油....
我聽講用3m 既 會好d  不過3m masking tape 有幾種  邊種先好呀~

3m is good and they r more or less the same

原帖由 karhey 於 2006-7-1 17:21 發表
3m is good and they r more or less the same

我試過用3m 既masking  tape  白色的
佢話 for smooth surface的
不過結果好易掉出來  尤其d 尖角位

買3M 縐紋膠會好好多, 但比Tamiya厚, 難cut

原帖由 ifrogi 於 2006-7-1 17:24 發表


我試過用3m 既masking  tape  白色的
佢話 for smooth surface的
不過結果好易掉出來  尤其d 尖角位

會唔會你個殼洗唔乾淨仲有油, D縐紋膠咪好易掉出來

原帖由 coronafans 於 2006-7-1 17:28 發表


會唔會你個殼洗唔乾淨仲有油, D縐紋膠咪好易掉出來

唔似喎 用普通cheap 野 痴得好實..

縐紋膠~ 兩層

I would like to use TAMIYA masking tape. Good cutting and performance.

I use 縐紋膠 from stationary shop

I didn't use anything, because I always print“渐变色”and“实色花”.
But I think tamiya is good and a little bit expensive.
.........and 3M is also good!