New Product Arrival Alert! (April 2009)

Dinballian · 發表於 2009-4-1 17:37:06

遊客登錄

您需要登錄才可以下載或查看，沒有帳號？新玩家註冊

x

本帖最後由 Dinballian 於 2009-4-1 17:39 編輯

LRP SXX TC Spec Speed controller

登錄/註冊後可看大圖

LRP have announced that their World Championship winning SXX TC spec speed controller will make its production debut at this weekends LRP Masters race in Germany. With a completely revised and updated software, ADPC 2, it offers even better throttle and brake control than previous models and the low profile heat sink and new internal design has improved heat dissipation even further. A new low profile high-rpm plugged fan, as well as the optimised Internal Temp Check System 2, are some of the other new features on the SXX.

You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site. Edit this entry.

Dinballian · 發表於 2009-4-2 16:23:41

本帖最後由 Dinballian 於 2009-4-2 16:24 編輯

登錄/註冊後可看大圖

COMING [/COLOR][/B]

登錄/註冊後可看大圖

[B]SOON

登錄/註冊後可看大圖

A novel mechanism in the condensed KONPAKUTOSHASHI sophisticated, providing you run exciting mighty. HPI FWD model is the first "switch", adopting a rigid BASUTABUSHASHI very simple but important. The weight of all low-, and proso millet and ran a few rolls. Also earned a front-load enough MOTAREIAUTO FURONTOMIDDOSHIPPU was placed, the machine will go hard. FWD is a quick and easy to run a specific but anyone can enjoy regardless of the skill of driving. RTR switch, you'll enjoy running so soon after purchase is completed model set.

登錄/註冊後可看大圖

Translation from HPI

Dinballian · 發表於 2009-4-2 16:39:02

本帖最後由 Dinballian 於 2009-4-2 16:47 編輯

Hop Ups parts for Tamiya Ford F-350 High-Lift 4X4

登錄/註冊後可看大圖

Wanna Hop Ups your Tamiya Ford F-350 High-lift 4x4? Yeah Racing hop up parts is one of your best choice! Various color is available in your favor. Get it now & make your F-350 different from your friend!
Click the link below to get the YR hop ups parts for Tamiya Ford F-350 RC car kit:
http://www.rcmart.com/catalog/tamiya-f350-c-595_744_1070.html

Dinballian · 發表於 2009-4-2 16:55:14

登錄/註冊後可看大圖

*Click the images to buy
Number of 3Racing RC Hop Ups Parts back in stock @ rcMart.com. Please check the following list for the recently restcoked items:
3RAC-AD12/LB 12mm Brake Adaptor - Light Blue
3RAC-MHS006/RE Motor Heat Sink W/ Fan For 280/300 Motor (High Finger) - Red
3RAC-SW05 Stainless Steel 5mm Shim Spacer 0.1/0.2/0.3mm Thickness
10pcs Each
3RAC-TR342 64 Titanium 3mm Turnbuckle - 42mm (2 Pcs)
3RAC-WC3/PU Aluminium M3 Countersink Washer (10 Pcs) - Purple
3RAC-WF305/PU Aluminium M3 Flat Washer 0.5mm (10 Pcs) - Purple
3RAC-WF310/LB Aluminium M3 Flat Washer 1.0mm (10 Pcs) - Light Blue
3RAC-WF310/PU Aluminium M3 Flat Washer 1.0mm (10 Pcs) - Purple
A18-R12/HD Swing Shaft - Heavy Duty For RC18-R
AWD-19/V2 Aluminum Motor Heatsink Mount Ver. 2 For Mini-Z AWD

登錄/註冊後可看大圖

AWD-30 Aluminium Rear Bulkhead For Mini-Z AWD
CY-01/WO Graphite Main Chassis For Cyclone Sport
DF03-10/LB Aluminium Steering Saver For DF-03
F103GT-14 Titanium Turnbuckle Set For F103GT
F103RM-12/BL Front and Rear Wing Set - High Downforce For F103RM - Black
F103RM-12/WI Front and Rear Wing Set - High Downforce For F103RM - White
HKU-2112 1/12 Scale Aluminum Adaptor
KZ-04/BU/WO Rolling Damper Set For Mini-Z MR-02 & MR-015 MM
KZ-08/1/BU Aluminium Steering Block (1 Degree) For Mini-Z MR-02 MR-015
M03M-13RK Rebuild Kit For #M03M-13/LB& TT01-14/LB
M03M-15/HD Wheel Axle - Heavy Duty For M03M
MIF-051/WI Plastic 5 Spoke Wheel And Tyre Set For Mini Inferno - White
MIF-052/WI Plastic 5 Spoke Wheel For Mini Inferno - White
MZII-007 Toe in & Out Steering Rod (Aluminum) For Mini-Z II
MZII-010 King Pin For Mini-Z II
MZII-014 Battery Heatsink For Mini-Z II
ST-005/BU Chassis Ride Height Gauge 0-15 (Bevel) - Blue
TA05-08/V2/LB Aluminium Steering Saver - Ver. 2 For TA-05
TB03-01 Universal Shaft For TB-03
TB03-12 7075 Propeller Joint For TB-03
TT01-03/LB Aluminum Main Shaft For TT-01
TT01-06/LB Aluminum Upper Suspension Mount For TT-01
TT01-08/LB Aluminum Motor Mount For TT-01
TT01-17/WO Graphite Upper Deck For TT-01
TT01-25/RG Replacement Gear Part For #TT01-25/LB
ZX5-08/WO Rear Graphite Shock Tower For Lazer ZX-05
ZX5-11/SI Aluminum Steering System For Lazer ZX-05
ZX5-17/V2/BU Aluminum Knuckle Arms Ver. 2 For Lazer ZX-05 & TF5
3RAC-AD12/BU 12mm Brake Adaptor - Blue
3RAC-FAN08 Protecting Pad Dust Cover For Cooling Fan 30 x 30 mm
3RAC-MHS005/LB Motor Heat Sink W/ Fan For 540 Motor
(Fan-Shaped) - Light Blue
3RAC-SW03 Stainless Stell 3mm Shim Spacer 0.1/0.2/0.3 Thickness
10pcs each
3RAC-WC4/BU Aluminium M4 Countersink Washer (10 Pcs) - Blue
3RAC-WF305/TI Aluminium M3 Flat Washer 0.5mm (10 Pcs) - Titanium
3RAC-WF310/TI Aluminium M3 Flat Washer 1.0mm (10 Pcs) - Titanium
3RAC-WF315/LB Aluminium M3 Flat Washer 1.5mm (10 Pcs) - Light Blue
AWD-05 Aluminum Knuckle 2 Degree For Mini-Z AWD
AWD-09/0 Rear Toe In / Out Linkage 0 Degree For Mini-Z AWD
AWD-09/2 Rear Toe In / Out Linkage 2 Degree For Mini-Z AWD
AWD-10/1 Front Toe In / Out Linkage 1 Degree For Mini-Z AWD
AWD-14 Damper Spring For Mini-Z AWD
AWD-26/V3 Ball Diff. Shaft Ver. 3 For Mini-Z AWD
AWD-28 Aluminium Battery Heatsink For Mini-Z AWD
CY-23/PU Rear Aluminum Hub Carrier For Cyclone
CY-28/WO Graphite Bumper Stiffener For Cyclone
DB01-04/LB Aluminium Front Suspension Mount For DB-01
DB01-06/LB Aluminium Rear Suspension Mount For DB-01
DF03-18 Swing Shaft For DF-03
DF03-20/WO Graphite Front Suspension Brace For DF-03
F103GT-02/WO Graphite Main Chassis For F103GT
F103GT-12/WO Graphite Rear Upper Deck Plate For F103GT (Original)
F103RM-11 64Pitch POM Gear Ring
FW06-08 Rear Swing Shaft +2 Offset For FW06
KZ-15/0/GO Aluminium Steering Block (0 Degree) For Mini-Z MR02-LM
M03M-05/LB Front Aluminium C Hub For M03M
M03M-06/LB Aluminium Front Knuckle Arms For M03M
M03M-11/V2 Swing Shaft Ver. 2 For M03M
M04M-02/LB Aluminium Knuckle Arm For M04M
M18T-02/BU Front Aluminium Shock Tower For M18T
M18T-07/BU Aluminum Ball Stud Set For M18T
M18T-12/BU Aluminium Ball Diff. Tube For M18T
M18T-19RF Rebuild Kit (Front) For #M18T-19/BU
MI-06/LB Front Suspension Mount For Micro-T
MI-22/WO Graphite Conversion Kit For Micro-Desert Truck
MIF-ST09/WI Tyre & Rim Set For Mini Inferno - White
NTC3-005 Swing Shaft For Nitro TC-3
TA05-10PB Nylon Pivot Ball For TA-05
A05-12/V2 Aluminium 12mm Wheel Adaptor (0 Degree) For TA-05
TA05-IF18 Universal Shaft Cusion For TA-05IFS
TA05-IF22/V2 Graphite Chassis Kit For TA-05IFS
TB03-08 7075 Solid Axle For TB-03
TF201C-001 Graphite Main Chassis & Radio Tray Set For F201 Chassis
TT01-E31/LB Bearing Steering Track For TT01-E
WH-03/BL 1/10 5 Dual Spoke Rim & Tyre Set On Road
(0 Offset - 24mm) - Black
WH-03/SI 1/10 5 Dual Spoke Rim & Tyre Set On Road
(0 Offset - 24mm) - Silver
ZX5-09/RF Aluminum Rear Front Suspension Mount For Lazer ZX-05
ZX5-21/WO Graphite Main Chassis For Lazer ZX-05
3RAC-BB01/RE Sub-C Battery Straps Socket - Red 30.00 300.00
3RAC-MHS004/GO Motor Heat Sink W/ Fan For 540 Motor (High Finger) - Gold
3RAC-MHS006/BL Motor Heat Sink W/ Fan For 280/300 Motor (High Finger) - Black
3RAC-WG115/BL 115mm PP Side Wings For 1/18 Buddy Kit - Black
AWD-41/BU Front Lower Bumper For Mini-Z AWD
M04M-03/0/LB Rear Aluminum Hub Carrier (0 Degree) For M04M
TB03-11 7075 Steering Racks For TB-03
TF201C-010 Ball Nut For F201 Chassis
TF5-02/WO Graphite Front Shock Tower For TF-5
TF5-03/WO Graphite Rear Shock Tower For TF-5
TS-501X/V1 Titanium Screw Set For 501X
TS-AWD/V1 Titanium Screw Set For Mini-Z AWD
TS-DF03/V1 Titanium Screw Set For Dark Impact
TT01-26/RG Replacement Gear Parts For #TT01-26/RG
TY-061202 1/10 Rubber Tires (4 pcs) For Tamiya M-Chassis Series
WH-25/GY 1/10 9 Spoke Wheel & Tyre Set For Drift(7mm Offset)
WH-25/SI 1/10 9 Spoke Wheel & Tyre Set For Drift(7mm Offset)
XN1-48/RE Aluminium Brake Bar For NT1
Where to buy?
http://www.rcmart.com/catalog/hopup-parts-c-595.html?manufacturers_id=46

Dinballian · 發表於 2009-4-2 17:04:35

~COMING SOON~

Yeah Racing New & Unique Design Hop Ups Parts

For F1 Formula RC Car!!

登錄/註冊後可看大圖

Yeah Racing will soon launch their highly developed hop ups parts for RC Formula One. The specific designed hop ups part are aiming to increases the strength of the F1 chassis, and there are number of optional adjustment for advance setting to improve the F1 Car performance on the track, in different conditions. The hop ups shown below are already down to the production line and will be released soon. Please keep updating the latest news from rc-rss.com or yeahracing.com.

登錄/註冊後可看大圖

Aluminum Ball Battery mount feature :
-Fit for LiPo (with case) & Stick Pack batteries
-Super strong and light weight
-Have 2 set of screw can adjust the car balance

登錄/註冊後可看大圖

Source : Yeah Racing

Dinballian · 發表於 2009-4-2 17:08:39

~COMING SOON~

登錄/註冊後可看大圖

~Re-Stock~

登錄/註冊後可看大圖

The restock time of the Altas EP 1/10 Mini Touring Car Series may varies, please check the availability by the URL below:
http://www.rcmart.com/catalog/kits-team-atlas-c-420_1200.html

Dinballian · 發表於 2009-4-6 17:25:12

本帖最後由 Dinballian 於 2009-4-6 17:26 編輯

登錄/註冊後可看大圖

*Click the image to buy
1/10 R/C Car Series No.426
Subaru Impreza WRC 2008 (TT-01 Type-E)
Item No: 58426　
【 Subaru's Final WRC Machine 】　 This is a 1/10 R/C assembly kit of the Subaru Impreza WRC 2008, which went on to win 2nd place on debut at the 7th round of the 2008 WRC World Rally Championship “The Acropolis Rally of Greece,”with driver Petter Solberg at the helm. The polycarbonate body realistically reproduces the 5-door hatch back's style and features separate parts such as the rear wing with vertical fins and the square shaped side mirrors. In addition, LED lights are installed in the front and rear metal plated light cases. Kit includes head (two/white) and tail (two/red) LED lights to depict always-on lighting action. With the fun-to-drive TT-01 Type-E chassis and the impressive body, this machine will remind you of the magnificent form of the WRC Impreza.

登錄/註冊後可看大圖

【 Enhanced Performance 】　 The bathtub frame of the newly evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame are fiberglass reinforced nylon upper deck and gear covers that improve rigidity, as well as a 3 piece tie rod that provides a smoother steering action. The low center of gravity, great balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability. Comes equipped with racing slick tires on the gold mesh-type wheels for enhanced realism.

登錄/註冊後可看大圖

【 Specifications 】　 ●Length: 434mm, Width: 188mm, Height: 141mm ●Wheelbase: 257mm ●Tire Width/Diameter (Front and Rear): 27/67mm ●Bathtub Type Frame ●Longitudinally Placed Motor Shaft-Driven Full Time 4WD　 ●Front and Rear 3-Bevel Differential Gears ●3-Piece Steering Tie-Rods　 ●4-Wheel Double Wishbone Suspension　 ●Front and Rear Friction Dampers ●Gear Ratio= 8.35:1 ●540 Type Motor　 ●Electronic Speed Controller
【 Separately Required Items 】　　●2-Channel R/C unit with ESC　●8xR6/AA/UM3 batteries for transmitter
Where to buy?
http://www.rcmart.com/catalog/rc-tamiya-tt01e-impreza-58426-p-28546.html
Source: Tamiya

Dinballian · 發表於 2009-4-6 17:42:52

Tamiya (58427) 1:10 M03M Fiat 500 EP - New Arrival!

登錄/註冊後可看大圖

*Click the image to buy

1/10 R/C Car Series No.427
Fiat 500
Item No: 58427
【 Cute, Compact, and Fun! 】　 This is a 1/10 scale R/C assembly kit of the 2008 European Car of the Year, the Fiat 500, which was released in March 2007 and enthusiastically received by the Italian consumer market. The polycarbonate body realistically reproduces the Nuova 500's round cute form that is succeeded from the predecessor Fiat Cinquecento. The high-performance front wheel drive M-03M chassis has the motor mounted at the front for excellent handling. Paint the Fiat 500 in your favorite coloring to enhance your enjoyment of driving this fun-to-drive R/C car.

登錄/註冊後可看大圖

【 FWD M-03M Chassis 】　 The M-03M chassis features front-mounted motor and front wheel drive just like the actual car for realistic handling. The easy to assemble, slim monocoque frame is made of durable resin, and features a 4-wheel independent double wishbone suspension with lightweight uprights for sharp steering cornering performance. The suspension's wheel axles are also fitted with eight 1050 size ball bearings to minimize friction loss. In addition, the centrally placed steering servo and isometric steering tie-rods optimize the balance and enhance excellent handling performance.

登錄/註冊後可看大圖

【 Specifications 】　 ●Length: 347mm ●Width: 170mm ●Height: 140mm ●Wheelbase: 225mm ●Tread (Front and Rear): 138mm ●Tire Width/Diameter (Frent and Rear): 25/59mm ●Monocoque Type Frame ●Front Wheel Drive
●3-Bevel Differential Gear ●Isometric Steering Tie-Rods ●4 Wheel Double Wishbone Suspension ●Front and Rear Friction Dampers ●Gear Ratio= 5.8：1 ●RS540 Type Motor ●Requires an Electronic Speed Controller (sold separately)

登錄/註冊後可看大圖

【 Separately Required Items 】　　●2-Channel R/C unit with ESC　●8xR6/AA/UM3 batteries for transmitterwhere to buy?
http://www.rcmart.com/catalog/rc-tamiya-m03m-fiat-58427-p-28547.html

Source: Tamiya

Dinballian · 發表於 2009-4-6 17:48:59

Tamiya 1:14 Tractor Trucks Scania R620 EP - New Arrival

登錄/註冊後可看大圖

*Click the image to buy

1/14 R/C Tractor Truck Series
Scania R620 6x4 Highline EP
Item No: 56323
Trucks are essential components of many logistics networks around the world. One such truck which can be seen on the roads carrying large loads is the biggest and most powerful Scania truck, the R620. Tamiya is proud to add this wonderful piece of machinery the R620 6x4 to the 1/14 scale R/C Tractor Truck lineup. This massive tractor truck features 3-axle and is approximately 458mm long. Beautifully reproduced cabin tilts forward separately from the fenders, just like the actual truck. The accurately modeled fenders themselves are removable for realistically depicting a low carrying load. Realistic chassis and suspension further add to the imposing form of this unique model.

登錄/註冊後可看大圖

About the Model
# LEDs accurately recreate the trucks front and rear lights.
# Attach the Multi Function Control Unit (MFC-01, not included) to provide sound effects such as attaching/detaching any of the currently available trailers, as well as other easily distinguishable truck sounds.
# 3-Speed Transmission allows gear shifting to be controlled during driving for added realism.
# Metal leaf spring suspension.
# Cabin tilts forward just like the full-sized truck.
# Type RS540 motor included.
# ESC, 4-channel transmitter, battery pack & charger not included.
# Also compatible with a wide range of Tractor Truck Option Parts for further customization.
SEMI-TRUCK KITS REQUIRE:
(unless stated differently above)
* Radio: 4-Channel with servo(s)
* Battery: 6-cell flat with standard Tamiya connector
* Charger: AC/DC timed or peak for 6-cell battery
* Paint: Polycarbonate for spare body
* Misc. Items: Building and track equipment
Where to buy?
http://www.rcmart.com/catalog/rc-tamiya-tractor-trucks-scania-r620-highline-56323-p-28545.html
Source: Tamiya

Dinballian · 發表於 2009-4-6 18:00:57

本帖最後由 Dinballian 於 2009-4-6 18:03 編輯

Yeah Racing Li-Po Racing Pack Batteries Series In Stock Now!

登錄/註冊後可看大圖

Yeah Racing featured Li-Po Racing Pack Battery has been restocked already @ rcMart .com. Due to the large demand of the Yeah Racing Li-Po Batteries, rcMart have full stock for LP-0032, LP-0036, LP-0042, LP-0043 and LP-0050 now.
- (#LP-0032) Li-Po Racing pack 7.4V 3200mAh 20C - item in stock
- (#LP-0036) Li-Po Racing Pack 7.4V 3600mAh 20C - item in stock
- (#LP-0042) Li-Po Classic Pack 7.4V 4000mAh 25c - item in stock
- (#LP-0043) Li-Po Saddle Pack 7.4 5000mah 20c 2S3P (70x43x24mm) - item in stock
- (#LP-0050) Li-Po Racing Pack 7.4V 5000mAh 25c with case - item in stock
Where to buy?
http://www.rcmart.com/catalog/battery-charger-battery-lipo-c-52_1285.html?manufacturers_id=47&sort=1a

Dinballian · 發表於 2009-4-6 18:04:53

Easter Special! FREE Tornado Cooling Fan with Motor ESC Set!

登錄/註冊後可看大圖

To celebrate the Easter Holiday, rcMart is offering a Special Easter Deal. By puchasing each of the selected Brushless ESC and Motor Set, you will receive a FREE Yeah Racing (#YA-0180) Tornado High Speed Cooling Fan for Heat Sink - Worth USD $11.90.
Please check the list below for the selected Brushless System including a FREE Tornado High Speed Cooling Fan:
- *Yeah Racing (#BM-0004) Ultimate Brainpower ESC 35A & 10T Sensorless Brushless Motor Set
- *Yeah Racing (#BM-0012) Ultimate Brainpower ESC 35A & 9T Sensorless Brushless Motor Set
- *Yeah Racing (#BM-0015) Ultimate Brainpower ESC 35A & 13T Sensorless Brushless Motor Set
- *Yeah Racing (#DM-0001) Drift Power Brushless ESC & Motor Set
- *Yeah Racing (#DM-0002) Drift Power Plus Brushless ESC & Motor Set
- *Yeah Racing (#FM-0001) Falsonic Competition Brushless ESC Motor Set
Where to buy?
http://www.rcmart.com/catalog/advanced_search_result.php?sort=1a&keywords=brushless+tornado

Dinballian · 發表於 2009-4-13 17:14:45

Yeah Racing Neck Strap Adaptor Balancer for Transmitter

Item No.TOL-007

登錄/註冊後可看大圖

Dinballian · 發表於 2009-4-13 17:21:47

Yeah Racing Transmitter Stand Coming Soon

Item No.TOL-005

登錄/註冊後可看大圖

登錄/註冊後可看大圖

Dinballian · 發表於 2009-4-13 17:22:41

登錄/註冊後可看大圖

*Click the image to buy
*Photos for reference only, radio/transmitter and accessories are NOT INCLUDED
The Yeah Racing Radio-K Aluminum Carrying Case Series designed to fit various range of radio such as Futaba, Spektrum and KO Propo, it can protect your transmitter from damage, and have custom-fit foam padded interior. The custom-fit foam is pre-cut and flexibly to fit your radio in a perfect position. The custom-fit foam provides plenty of room for other RC accessories storage as well. It’s easy carrying with light-weighted material.
For: Spektrum DX7 / DX6i / DX3R / DX3S , Futaba 4PK / 4YF / 4GWD / T2ER / T3VCS / 7C 2.4G / 3GR, KO Esprit

登錄/註冊後可看大圖

- Material: Aluminum & ABS Plastic (with Foam)
- Color: Black
- Aluminum and High Quality Plastic Hard Outer Shell with Finished and Stippled Surface.
- Custom-Cut Foam Component to Fit the designated Stick Radio and Accessories.
- Layers of Foam with Storing Space for Accessories.
- High Density Foam to Protect the Products.
- Secure Latches.
- Comfort Handle.

Yeah Racing Radio-K Aluminum Pistol (Wheel) Radio Carrying Case (#YA-0099) - Inner Size: 360 x 200 x 170 (For Spektrum DX3R / DX3S, Futaba 4PK)
Yeah Racing Radio-K Aluminum Stick Radio Carrying Case (#YA-0098) - Inner Size: 380 x 210 x 125 (For Spektrum DX7/ DX6i, Futaba 4YF / 4GWD / T2ER / T3VCS / 7C 2.4G / 3GR, KO Esprit)
The Yeah Racing Radio-K (#YA-0098) Aluminum Carrying Case is compatible with the radio/transmitter below:

登錄/註冊後可看大圖

Yeah Racing Aluminum Carrying Case for Radio Kit

Radio Case:	Radio-K Aluminum Stick Radio Carrying Case (#YA-0098)	Radio-K Aluminum Pistol (Wheel) Radio Carrying Case (#YA-0099)	Aluminum Carrying Case for 3PK (#YA-0100)	Aluminum Carrying Case for EX-10 (#YA-0101)
Exterior Dimension(cm):	(L)39.5 x (H)23.5 x (W)13.5	(L)37.9 x (H)22.9 x (W)18.1	(L)38.7 x (H)27.1 x (W)15.0	(L)38.1 x (H)27.0 x (W)14.0
Interior Dimension(cm):	(L)38.3 x (H)21.2 x (W)12.8	(L)36.2 x (H)20.3 x (W)13.5	(L)37.1 x (H)24.9 x (W)14.0	(L)36.8 x (H)24.5 x (W)13.2
Weight(g):	1505 g	1645 g	1457 g	1253 g
Material:	Aluminum & ABS Plastic (with Foam)	Aluminum & ABS Plastic (with Foam)	Aluminum & ABS Plastic (with Foam)	Aluminum & ABS Plastic (with Foam)
Color:	Black	Black	Silver	Silver
Compatible With:	Futaba: 4PK Spektrum: DX3R, DX3S	Futaba: 4YF, 4WGD, T2ER, T3VCS, 3GR, 7C(2.4G) Spektrum: DX6i, DX7 KO Propo: Esprit	Futaba: 3PK	Spektrum: EX-10

Source: Yeah Racing
Where to buy?
http://www.rcmart.com/catalog/advanced_search_result.php?sort=1a&keywords=radio-k

Dinballian · 發表於 2009-4-13 17:24:11

ZEN 1:10 F1 Tyres, Wheels Restock Now !

Can use on Tamiya F103

登錄/註冊後可看大圖

ZEN (#F1-F35B) Front 35 Deg Foam Tyres W/Rim For Tamiya F103
ZEN (#F1-F35W) Front 35 Deg Foam Tyres W/Rim For Tamiya F103
ZEN (#F1-F38W) Front 38 Deg Foam Tyres W/Rim For Tamiya F103
ZEN (#F1-R25B) Rear 25 Deg Foam Tyres W/Rim For Tamiya F103
ZEN (#F1-R25W) Rear 25 Deg Foam Tyres W/Rim For Tamiya F103
ZEN (#F1-R30W) Rear 30 Deg Foam Tyres W/Rim For Tamiya F103
Where to buy?
http://www.rcmart.com/catalog/advanced_search_result.php?sort=1a&keywords=zen+f103

Dinballian · 發表於 2009-4-13 17:25:24

Yeah Racing Ball Battery Mount for F103RM & F103GT coming Soon

~COMING SOON~

Yeah Racing New & Unique Design Hop Ups Parts

For F1 Formula RC Car!!

登錄/註冊後可看大圖

Yeah Racing will soon launch their highly developed hop ups parts for RC Formula One. The specific designed hop ups part are aiming to increases the strength of the F1 chassis, and there are number of optional adjustment for advance setting to improve the F1 Car performance on the track, in different conditions. The hop ups shown below are already down to the production line and will be released soon. Please keep updating the latest news from rc-rss.com or yeahracing.com.

登錄/註冊後可看大圖

Aluminum Ball Battery mount feature :
-Have 2 set of screw can adjust the car balance

登錄/註冊後可看大圖

-Fit for LiPo (with case) & Stick Pack batteries

登錄/註冊後可看大圖

-Super strong and light weight

登錄/註冊後可看大圖

-Increases oveall grip

Source : Yeah Racing

Dinballian · 發表於 2009-4-23 11:26:52

本帖最後由 Dinballian 於 2009-4-30 17:21 編輯

Yeah Racing NiMh Battery 150mAh 2Pcs for Losi micro-T

登錄/註冊後可看大圖

More :
http://www.yeahracing.com

Dinballian · 發表於 2009-4-23 11:30:23

本帖最後由 Dinballian 於 2009-4-30 17:18 編輯

Yeah Racing F103 Test Drive - rear suspension set

登錄/註冊後可看大圖

Producing more competitive high-quality RC products and making RC hobby more interesting is the aim of the Yeah Racing Products development team. Through a long- term research and testing, we have successfully developed various optional parts which enhance the function balancing of the fitted components of F103 racing chassis and the overall performance of it. Such new parts for F103 will come soon. And, you shall see our achievement.

登錄/註冊後可看大圖

Test Result:
Our Yeah racing Development Team has tested the F103 optional parts recently. The latest update of the F103 optional part is the improvement on the motor mount. Please have a look at the following photos for reference which the best set up of the motor mount. The final version of the motor mount is just arrive rcMart.com - (#F103RM-013BK) Single Piece Aluminum Motor Mount is suitable for the Tamiya F103RM / F103GT / F103 15th Anniversary chassis / (F103LM - Need 6X8X16 mm Spacer NOT INCLUDED) and it is available now!

登錄/註冊後可看大圖

Source : YeahRacing.com

Dinballian · 發表於 2009-4-23 11:36:44

本帖最後由 Dinballian 於 2009-4-30 17:18 編輯

YR YA-0106 4-In-1 Multi-Purposes Alloy Turnbuckle Turner

登錄/註冊後可看大圖

More :
www.yeahracing.com

Dinballian · 發表於 2009-4-23 11:37:48

本帖最後由 Dinballian 於 2009-4-30 17:10 編輯

Spice Hop Ups - Tire / Wheel / Body Set for M-Chassis Arrived!

登錄/註冊後可看大圖

* Click the image for more information
Looking for some hop ups to outstanding your 1:10 M-chassis or Mini-Z? If yes, you should have a look at the hop ups parts from "SPICE", who produce top quality hop ups parts for 1:10 M-chassis and Mini-Z. Please visit rcMart for "SPICE" hop ups parts.
The following items from "SPICE" has just arrived rcMart.com

登錄/註冊後可看大圖

SPA-122 SPICE (#SPA-122) 5.5mm Molded Insert (Middle) For M Car (BK)
SPA-123 SPICE (#SPA-123) 5.5mm Molded Insert (Hard) For M Car (PP)
SPA-139 SPICE (#SPA-139) 9-Spork mini wheel For M Chassis (WT)
SPA-140 SPICE (#SPA-140) 9-Spork mini wheel For M Chassis (BK)
SPA-141 SPICE (#SPA-141) 9-Spork mini wheel For M Chassis (YW)
SPA-150 SPICE (#SPA-150) Mini Racing 24R Tire Set
SPA-151 SPICE (#SPA-151) Mini Racing 28R Tire Set
SPA-152 SPICE (#SPA-152) Mini Racing 32R Tire Set
SPA-153 SPICE (#SPA-153) Mini Racing 36R Tire Set
SPA-155 SPICE (#SPA-155) Mini Drift Tire For M Chassis
SPM-205 SPICE (#SPM-205) Mazda RX-7 (FC) Mini-Z Body Set
SPM-206 SPICE (#SPM-206) Mazda 6 Mini-Z Body Set
SPM-207 SPICE (#SPM-207) 34Z Type Mini-Z Body Set
SPM-208 SPICE (#SPM-208) 35R Type Mini-Z Body Set
Where to buy?
http://www.rcmart.com/catalog/advanced_search_result.php?sort=1a&keywords=spice

		自動登錄	找回密碼
密碼			新玩家註冊