Gen-X 10 Pro Graphite Kit (World GT)

haha!~  thxq bother benz .. i will be careful about the petty screw
i will use top toy  and 9650 9.5t first....
later trytry ko esc ko949 3.5.....
but i ask x全..they say dont use 3.5

EDI,

I am going to try again the GenX10 tonight. I rebuild it on sunday on ride height, ball differential and front toe in.

Previously handling is....too "naughty". haha...I can't manage it.

Really need to be careful on the screw. So soft....

Henry

wa~!你地一以再咁提醒我!~我真係好驚woo
玩起上黎有冇問題gar

haha...don't worry. I just ask you to be careful je!
At least...i played a few times with my 5.5T....so far not yet "self destruct"! haha...

But some comment from me when assembly this CRC GenX10

1)There are so many different size screws! I don't know why need so many different size. They give you all necessary hex screw driver but for me, that is too inconvenient. All my existing screw drivers for Japan/Europe model not fit this US kit.

2)My kit...the ball differential is not very good. The differential plate can't sit onto the holder and I need to modify it a little bit. I don't expect this will happen. Some other plastic part also need certain hand modify. (I built Tamiya/Kyosho/HPI/Xray/Tech Racing car before, Xray is the best, no doubt. Second is HPI)

But I must say...after I complete it....it really looks cool! haha...I like the red color screw and the design of center placed battery. This is very nice.

Enjoy it.

just assembly to servo mont....byt how come no sdervo saver gar i try to use xway 1/12 servo saver,,,but too short......
and the red screw is really really really fucxxxg soft....how come like that:funk:i think i will buy some tamiya screw...i got so many red screw fucx up...

oh....Brother EDI. Sad to know lots of your screw is {banned} up.  How you can fit the replacement.  Remember those screw is British standard, in inche, not matric.  You can't use tamiya screw for metal parts.
Servo mount, just use normal 1/12 saver should be ok ka bo....I use 12 son saver bought from cat shop. It works for me...

okok bother benzi will go cat  shop today see see thx!~

今次第一次砌crc. 少少失望..比起xway(12)砌起上黎樣樣就住就往差D差D麻鬼煩煩......,
人地xway砌起上黎樣樣簡單清楚...,
不過呢我係(樓)D紅色SCREW姐...等我今日去揾D藍色TRD SCREW攪攪先,
仲有,BALL LINK膠頭又(媽)吓先..D膠薄到死...不過好似喺美製車特點 ,
希望砌起會過引D啦

Don't screw TRD screw into CRC metal parts ah...you will damage both.
You you should not compare XRay with US made model, like CRC or AE.  CRC and AE is bad in quality, esp on plastic portion.  XRay, a delux product la....

終於叫做砌好!~真係好紅
現發現兩問題
車尾唔知點解側埋一邊,,攪極到攪唔好.仲攪到有粒screw超滑牙
servo已裝好,但servo好有怪聲...(頂servo的聲音)

any picture? Which screw 滑牙?
May be it that is the side spring issue

滑牙有乜辦法呢

EDI,

Do you aware that the link rod for steering are different size for left/right in your kit? Mine find this problem. And the length is too short that I can't make it a little bit toe in. I need to find alternative.

And your servo mounted higher than normal? Any special purpose?

Henry

我都唔係幾明..Y粒BALL頭唔ARM位又太"林"
我張隻SERVO放咁高係因為想兩條BALL LINK平行D冇咁多阻力
但我从家隻SERVO重有小小怪聲

EDI, do you find the front ride height too high? I need to add extra spacer for it but can't use their spacer to stack up as the red screw not long enough. So I need to add spacer on the mounting toward chassis.

Henry

Brother EDI and Henry;

Share my X10 first.

My streering rod is same length and size.  And the length enough for me to set toe out/in.
EDI, my servo also have tricky sound, but I just ignore it...and the hight of your servo will make the ackerman change.
滑牙....you need a ~3mm drill and break the head of the crew, then, see what can be done after the head removed.  50% chance you need to buy parts #3337.  I saw cat shop have stock.
Henry, you need to use longer screw in order to set the ride high.  I give up the red screw and change to matric / ti screw for stacking of those spacer.  It doesn't matter as those screw can't be seen from external

Benz,

Yes I know I need longer screw but not I have another spacer for it so may be still ok.

I still feel the ball differential not moving smoothly when I tighten it. I think I will go to cat shop to buy new differential gear and ceramic ball tmr. I suspect that is the key suspect for my easy spinning even in straight road.

Brother EDI and Henry;

Share my X10 first.

My streering rod is same length and size.  And the length enough for me to set toe out/in.
EDI, my servo also have tricky sound, but I just ignore it. ...
benz1850 發表於 2009-4-3 01:20

                               
登錄/註冊後可看大圖

HAHA BOTHER BENZ!~ 粒滑牙拎番出黎LA..淨係要買番粒SCREW,..