RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 2458|回復: 18
打印 上一主題 下一主題
收起左側

Yokomo 有色電鍍呤質量問題.

[複製鏈接]
跳轉到指定樓層
1#
cwa 發表於 2006-5-29 00:18:22 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
Original message to Yokomo:

The gold paint of the rim (part no.ZR-DR18G) get off easily
after only 15mins runtime without any crash.

Reply from Yokomo:

We are sorry but, the coating color for the rims are easy come of .
We are trying to improve but, it is so difficult at the moment.
2#
surfhk 發表於 2006-5-29 00:23:03 | 只看該作者
I got the same problem, but after repaint the white part in Tamiya gold color, the paint doesn't get off anymore!!
3#
hamilton521 發表於 2006-5-29 00:30:29 | 只看該作者
我隻軨都甩都九彩
4#
 樓主| cwa 發表於 2006-5-29 00:34:39 | 只看該作者
原帖由 surfhk 於 2006-5-29 00:23 發表
I got the same problem, but after repaint the white part in Tamiya gold color, the paint doesn't get off anymore!!


Yes, u're right.
So, I don't know why Yokomo make the rims so bad.
5#
Vinz 發表於 2006-5-29 00:52:58 | 只看該作者
So do i !
So damn!
Its pissed me off !
6#
surfhk 發表於 2006-5-29 00:57:10 | 只看該作者
原帖由 cwa 於 2006-5-29 00:34 發表


Yes, u're right.
So, I don't know why Yokomo make the rims so bad.


Due to the chrome flake and peer off the the paint on it, so the repaint is directly apply on the plastic (White part)......it should be fine after re-paint.
7#
surfhk 發表於 2006-5-29 00:58:40 | 只看該作者
As seen from the photo, is it the metal brake disk parts??
8#
 樓主| cwa 發表於 2006-5-29 02:54:12 | 只看該作者
原帖由 surfhk 於 2006-5-29 00:58 發表
As seen from the photo, is it the metal brake disk parts??


sticker only
9#
Deemax 發表於 2006-5-30 12:40:41 | 只看該作者
哈哈...!Me too我隻軨都甩都九彩, 不過我就張0的電度整走翻噴.
10#
hkopium 發表於 2006-5-30 13:21:51 | 只看該作者
點整走D電度? 用咩工具?

我都想翻噴D轆.
11#
mikewu 發表於 2006-5-31 00:21:54 | 只看該作者
原帖由 hkopium 於 2006-5-30 13:21 發表
點整走D電度? 用咩工具?

我都想翻噴D轆.


Try your wife's nail polish remover...  the chrome comes off easy.. but make sure you don't press hard on it because you might put your finger prints on the rims..
Easiest way is use a paint brush, cut the length in half to make it stiffer... then brush it til all chrome comes off.........
And don't tell your wife you use up the nail polish remover....  Or go downstairs to "Watson's" and get your own bottle....
12#
雷公 發表於 2006-5-31 01:32:26 | 只看該作者
模型油始終係雙星既世界﹐番屋企刮曬D油出黎﹐可能用膠紙都得﹐然後噴層PRIMER﹐再噴層TS油
13#
hkopium 發表於 2006-5-31 02:18:40 | 只看該作者
Okay! Thanks brothers!
14#
Edde 發表於 2006-5-31 02:47:07 | 只看該作者
噴完底灰..... 先噴黑色.... 再噴金屬色, 隻色會更出同實,
15#
hkopium 發表於 2006-5-31 03:18:34 | 只看該作者
原帖由 Edde 於 2006-5-31 02:47 發表
噴完底灰..... 先噴黑色.... 再噴金屬色, 隻色會更出同實,



                               
登錄/註冊後可看大圖


死... 我比 Lancer Evo 用既 Tamiya 白膠轆, 噴紅色TS油時無落 Primer... 係咪會好易甩色.

[ 本帖最後由 hkopium 於 2006-5-31 13:39 編輯 ]
16#
Edde 發表於 2006-5-31 15:52:43 | 只看該作者
原帖由 hkopium 於 2006-5-31 03:18 發表



                               
登錄/註冊後可看大圖


死... 我比 Lancer Evo 用既 Tamiya 白膠轆, 噴紅色TS油時無落 Primer... 係咪會好易甩色.


噴膠料,無落底灰,你噴紅色.....最多都係紅色無咁實,無乜嘢嘅......唔會易甩,

提一提之前嘅,如噴底灰, 黑油,最好薄薄就夠 la,免得啲油太厚,咁就唔好 la.

講多少少......如下次要噴金屬料,做以上步驟前,先噴隻 Metal Primer, 就無咁易甩色,因油咬膠多過咬金屬.
17#
v305304 發表於 2006-11-28 21:51:19 | 只看該作者

回復 #10 hkopium 的帖子

試吓用天拿水.
18#
v305304 發表於 2006-11-28 21:57:37 | 只看該作者
19#
nismoHK 發表於 2006-11-29 11:48:21 | 只看該作者
我用漂白.得呀

                               
登錄/註冊後可看大圖




                               
登錄/註冊後可看大圖


[ 本帖最後由 nismoHK 於 2006-11-29 11:55 編輯 ]
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-5-16 03:24 , Processed in 0.306140 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表