Help! 京商MR02 疊fet問題!!!

Help! 京商MR02 疊fet問題!!!
各位師兄,請問粒fet係咪買番同塊MR02板上粒fet同既型號,之後以並聯方式焊落去就得嫁喇???
如果唔係跟原本果粒,咁應該用咩型號呢,同埋要焊幾多粒左右??
Thank you

通常用4562 FET ga la, 上車場搞啦, 買FET包焊~

睇link.
http://www.atomicmods.com/Catego ... Z-FET-Stacking.aspx

7a的ok

原帖由 2slow 於 2009-2-15 01:32 發表

                               
登錄/註冊後可看大圖

通常用4562 FET ga la, 上車場搞啦, 買FET包焊~

Dear C Hing
The FET for MR01, MR02 and AWD are the same?
What is the Max number of adding FETs?
I heard some C Hing added 6-8 FETs, it that OK?
Thanks
Adam

原帖由 bidforfuns 於 2009-2-15 19:42 發表

                               
登錄/註冊後可看大圖

Dear C Hing
The FET for MR01, MR02 and AWD are the same?
What is the Max number of adding FETs?
I heard some C Hing added 6-8 FETs, it that OK?
Thanks
Adam

The Fet's are the same, there is no "maximum"number but most people only put 6.

原帖由 defcone 於 2009-2-15 22:01 發表

                               
登錄/註冊後可看大圖

The Fet's are the same, there is no "maximum"number but most people only put 6.

Yes, some people even put 10 on 2.4G AWD!

原帖由 scalpel 於 2009-2-16 13:09 發表

                               
登錄/註冊後可看大圖

Yes, some people even put 10 on 2.4G AWD!

Silent Gas.

原帖由 defcone 於 2009-2-16 13:17 發表

                               
登錄/註冊後可看大圖

Silent Gas.

I think so too!