2.4G VS AD!!

個雞斷o左喎

原帖由 scalpel 於 2009-1-9 01:12 發表

                               
登錄/註冊後可看大圖

Not just AM, has 2.4G MR-02 too!

乜出左2.4 readyset?

原帖由 ansonlau 於 2009-1-9 07:13 發表

                               
登錄/註冊後可看大圖

個雞斷o左喎

肉緊得濟...玩到雞都斷o左...

出便好似好少見AD賣,同AD都幾貴 , 2.4G好似好bow !

原帖由 defcone 於 2009-1-9 09:16 發表

                               
登錄/註冊後可看大圖

乜出左2.4 readyset?

唔係呀，打錯左，我意思係嗰啲利曼

因為想買架二手AD,所以買枝控..........
定係買新2.4G好???

原帖由 jonny0721 於 2009-1-9 14:35 發表

                               
登錄/註冊後可看大圖

因為想買架二手AD,所以買枝控..........
定係買新2.4G好???

如果budget唔係問題就梗係買2.4G啦

買二手 應該會有 d Option parts 跟, 但上手點玩你就唔知 law, 同 AD 會多條天線,  2.4g 唔洗

p.s 我有支 KT-18 控(2.4g)如果你有興趣可以 PM 我.

唔係分別唔大咩

原帖由 jonny0721 於 2009-1-9 14:35 發表

                               
登錄/註冊後可看大圖

因為想買架二手AD,所以買枝控..........
定係買新2.4G好???

2.4G 其真都幾貴
KT-18 $480
AWD $820
Body $200

不如等吓有無人放二手

原帖由 jonny0721 於 2009-1-9 14:56 發表

                               
登錄/註冊後可看大圖

唔係分別唔大咩

咁有新野玩，梗係試新野，人就係貪新忘舊架啦！

原帖由 jonny0721 於 2009-1-9 14:56 發表

                               
登錄/註冊後可看大圖

唔係分別唔大咩

有師兄放AD PCB & module呀！
http://bbs.rc-evo.com/redirect.php?tid=107912&goto=lastpost#lastpost

若果你認為賣二手 AD 板o個個人信得過，咁 AD 都好。
2.4G板 以我經驗，比 AM板 易壞好多倍。(不過問其他人又話佢地D 2.4G 未壞過...)。

原帖由 sfdo 於 2009-1-9 19:51 發表

                               
登錄/註冊後可看大圖

若果你認為賣二手 AD 板o個個人信得過，咁 AD 都好。
2.4G板 以我經驗，比 AM板 易壞好多倍。(不過問其他人又話佢地D 2.4G 未壞過...)。

That's your own experience only, I know many people are using 2.4G, no problem for them at all! 2.4G still very reliable!

原帖由 scalpel 於 2009-1-10 00:24 發表

                               
登錄/註冊後可看大圖

That's your own experience only, I know many people are using 2.4G, no problem for them at all! 2.4G still very reliable!

好有保留

i start mini-z from AM, AD AND 2.4 now. What I know when I change to 2.4GHz from AD, It is has a hard time for me. But after FET added and some setup for PBC by computer. Now have not any big problem at all.

原帖由 samy 於 2009-1-12 14:46 發表

                               
登錄/註冊後可看大圖

i start mini-z from AM, AD AND 2.4 now. What I know when I change to 2.4GHz from AD, It is has a hard time for me. But after FET added and some setup for PBC by computer. Now have not any big problem  ...

May I ask what setup should have for the PCB?

原帖由 samy 於 2009-1-12 14:46 發表

                               
登錄/註冊後可看大圖

i start mini-z from AM, AD AND 2.4 now. What I know when I change to 2.4GHz from AD, It is has a hard time for me. But after FET added and some setup for PBC by computer. Now have not any big problem  ...

I really want to know whats the difference after adding FET onto 2.4PCB, what is the effect?
and why are you having hard time after switching from AD to 2.4?? 2.4 唔係應該更靈敏ga咩?