RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 1711|回復: 15
打印 上一主題 下一主題
收起左側

want to buy awd mini-z

[複製鏈接]
跳轉到指定樓層
1#
C.HEMOSS 發表於 2008-12-23 18:15:11 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
Hi,i am new from here,i want to buy awd end of this month,can anyone make me a list of the parts i need?
Also i want to know does that cost 6-8 k if i want  parts to be the best,because i dont wat to wast money to
buy ready set,i would like to tune up all by my self,thanks for the help.

1.all tune up parts<i want the best one>(with body)
2.remote control<all i know is ex-10,any better than this one?>
3.the lowest price to add fed<some one said on this board ct is the lowest shop to add fed>
4.battery charge machine and battery<all i know is sayno 1000 mah><battery charge machine i have no idea,all i want is fast charge>
5.cover for mini-z awd<witch model i can use>

[ 本帖最後由 Ken 於 2008-12-23 18:32 編輯 ]
2#
Tim718 發表於 2008-12-23 19:00:09 | 只看該作者
請問你之前有無玩開搖控車呀?例如1/10電車果類
3#
terencedull 發表於 2008-12-23 20:07:51 | 只看該作者
原帖由 C.HEMOSS 於 2008-12-23 18:15 發表
Hi,i am new from here,i want to buy awd end of this month,can anyone make me a list of the parts i need?
Also i want to know does that cost 6-8 k if i want  parts to be the best,because i dont wat to ...


must buy tune up parts :
珠差
metal 直濕
車軑
頭尾軑尺..京商有隻一包膠做有齊度數
一套彈弓,介指,bearing,
metal motor cover, motor mount,
其他玩落有需要先買(eg metal轉向杯,頭尾蓋,狗骨)

for fet and motor, go CT
4#
 樓主| C.HEMOSS 發表於 2008-12-23 20:12:28 | 只看該作者

回復 2# 的帖子

no..i didnt have any 搖控車 before,now i had one dlp rx7,but it's like a toy car,that's why i want to buy mini-z.
5#
terencedull 發表於 2008-12-23 20:13:23 | 只看該作者
for control, EX1 UR is the newest.
For cover, Ferrari ENZO or FXX( but need extend to 98mm), choise some long and width cover...much stable
for battery, ORION 750 or 900(i never seen 900)
for charger......xcharger...most cheap
6#
 樓主| C.HEMOSS 發表於 2008-12-23 20:16:36 | 只看該作者

回復 3# 的帖子

ic..so you mean i dont need to get all of the stuff at one time,am i right?
and how about the remote control. and how much will it cost if i buy the
turn up parts that was on your list?thanks.
7#
Tim718 發表於 2008-12-23 20:22:03 | 只看該作者

回復 6# 的帖子

買架2.4 AWD +EX1 UR 2.4module 就OK.
8#
terencedull 發表於 2008-12-23 20:24:19 | 只看該作者
原帖由 C.HEMOSS 於 2008-12-23 20:16 發表
ic..so you mean i dont need to get all of the stuff at one time,am i right?
and how about the remote control. and how much will it cost if i buy the
turn up parts that was on your list?thanks.


yes..no need to buy all...waste of money....
it should around 5k with remote control
9#
 樓主| C.HEMOSS 發表於 2008-12-23 20:28:35 | 只看該作者

回復 7# 的帖子

what is 2.4? and exi ur 2.4 module?because i am very new for remote control car.thx!!!
10#
 樓主| C.HEMOSS 發表於 2008-12-23 20:29:17 | 只看該作者

回復 8# 的帖子

sounds cool with 5k...
11#
defcone 發表於 2008-12-23 20:41:34 | 只看該作者
原帖由 C.HEMOSS 於 2008-12-23 20:29 發表
sounds cool with 5k...


2.4Ghz is a new type of radio system, much better than the common AM system used. There is almost no glitching whatsoever since you have a relatively high budget, you should go for 2.4Ghz.

The SAS kit costs around 390 and it improves rear end traction a lot.
12#
 樓主| C.HEMOSS 發表於 2008-12-23 23:52:00 | 只看該作者

回復 11# 的帖子

thanks keith big big..and all of the big big...i will update you guys when i get it from shop..cant wait to get the car to hand :lol
any more comment my car?still didnt  talk about the body,moto,battary machine,batter
13#
 樓主| C.HEMOSS 發表於 2008-12-23 23:57:17 | 只看該作者

回復 5# 的帖子

so you mean it has different size for the car?god...how hard to chooes
14#
 樓主| C.HEMOSS 發表於 2008-12-24 00:05:09 | 只看該作者
also do you guys ofen go to ct?if you guys are,i can go there to get help from you guys..
15#
terencedull 發表於 2008-12-24 00:37:06 | 只看該作者
原帖由 C.HEMOSS 於 2008-12-23 23:57 發表
so you mean it has different size for the car?god...how hard to chooes


For AWD, mainly 90 and 94mm
but u can buy extender to extend to 98 even 104
and use width offset

by my experience, ENZO and FXX 車身底,重心底,唔會反車
16#
Aurora 發表於 2008-12-24 15:38:30 | 只看該作者
C.HEMOSS,

If you are going to buy all the parts separately, I advise you to go onto CT track first to chat with some experienced "C-hing"...and make up a list before you go shopping.  And downloading the kyosho AWD instruction might be nice, so you know your list have covered all the items.

There are a few parts that I highly recommend for 'tune-up' parts, and they are probably the best that you can get:

-Kyosho ball diff(front and rear)
-Kyosho blue/grey chassis
-PN or Kyosho front and rear diff covers
-PN or Atomic spring sets(ask C-hings what are the most commonly used springs before getting them)
-PN mid-axle parts(to secure the axle onto the body)
-Atomic rear spur gear
-FETs upgrade from CT
-Kyosho pinion
-Kyosho ball bearing or PN bearing
-Kyosho wheel nuts

As for SAS rear suspension system, I have mixed feeling about it.  It does improve rear traction, but the version I are made of soft plastic material and definitely not usable.  Ver II has significant improvement, but the product does wear down quickly...I used mine few times a week and after a month of use, there are some significant slack/wobble developed.

Have fun!
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2025-5-1 07:37 , Processed in 0.050721 second(s), 15 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表