RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 1828|回復: 4
收起左側

TRF419 Mid-motor conversion

[複製鏈接]
 樓主| H2RD 發表於 2020-1-28 20:57:04 | 顯示全部樓層 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
81692259_614698539371356_5277215360133627904_o.jpg

- It will compatible with 419, 419X and 419XR, we are testing it right now to make sure it is working, also any special parts need.
- It is a mid-motor format, as same as our TRF420 mid-motor conversion, but they are not the same.
- It can use the previous suspension mount system while it also can use the new one, no worry you are way behind the new brother TRF420 for suspension setting. Also can use the new suspension arm as you want.
- It will included a front and rear damper stay, as 419 have a wider bulkhead and 419X/XR are more narrow. To make sure the 419 user can use it, a new damper stay are needed. And it will lower than the old one while it still can use the previous damper.
- It can use the new battery holder from TRF420, also can use shorty battery. If you don't have it, fiber tape hole still there.
- We make it as narrow as it can to make it flex enough, as we will keep using Toray CF 2.5mm board.
- Rear flex control parts will included.

We still doing some testing, so price and launch date now yet confirm, but we promise it will not too long of waiting.








chacha 發表於 2020-1-28 21:05:39 來自手機 | 顯示全部樓層
期待!
sean2013 發表於 2020-1-29 17:19:50 | 顯示全部樓層
中置車無人話好扭,仲不斷有沽壓
 樓主| H2RD 發表於 2020-1-30 01:09:01 | 顯示全部樓層
sean2013 發表於 2020-1-29 17:19
中置車無人話好扭,仲不斷有沽壓

多謝閣下意見。

現時主流中置PULLEY,其實與中置摩打,不單設計上有分別,扭動特性其實亦都不同。
所以兩者其實唔可以混為一談。

謝謝!

 樓主| H2RD 發表於 2020-3-5 21:51:39 | 顯示全部樓層
89114044_641554920019051_5954891809950793728_o.jpg
88194297_641555120019031_444742476226363392_o.jpg
89204495_641555870018956_920782769980702720_o.jpg
89157765_641555233352353_7057369915803566080_o.jpg
88336000_641555533352323_7590059385083133952_o.jpg
88321453_641555803352296_4316034784896745472_o.jpg
88248407_641555616685648_4412004313002409984_o.jpg
88248346_641555713352305_688222346875502592_o.jpg
88228335_641555466685663_7467222577388191744_o.jpg


Our 419MM kit, installed with TRF419 chassis parts.
Also including our rear stiffener and battery holder which is option not included in the kit.
Spend a little bit more and you have a new chassis for race.

                               
登錄/註冊後可看大圖
Again, it is suitable for 419/X/XR and 419 need a special bearing set for install.
First pre-order list already full and second pre-order we still accepting order, however it will ship out at end of March.

https://h2-rd.com/collections/chassis-kit/products/trf419-mid-motor-conversion-kit





您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2021-10-26 04:43 , Processed in 0.049955 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表