RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 80839|回復: 272
打印 上一主題 下一主題
收起左側

新四驅M車!MF01X玩家專頁

  [複製鏈接]
跳轉到指定樓層
#
小龍 發表於 2015-4-19 10:56:01 | 只看該作者 回帖獎勵 |正序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
本帖最後由 小龍 於 2015-7-8 22:39 編輯

星星新四驅M車!
行軸三個輪距,下文來自RCRACER。
Jimny (JB23) (MF-01X)Three wheel base further widen the play!
Compact shaft drive 4WD model is new!

Compact M orthodox play tough in the chassis size! "MF-01X" chassis
Choosing a travel location in handy size "involuntarily want become Tsuredashi to play" has been developed on the concept of "MF-01X" chassis.
The main frame is a monocoque structure that is integral to the gear box, and both light weight and high rigidity.
The middle of the chassis of the horizontal battery, I've realized the shaft 4WD compact size in the rear motor layout.
Equipped with tire of touring car size to 4-wheel double wishbone suspension, and finished in the "play" chassis you do not choose a place to run.
Also, change the spacer is joint to the chassis, it is three wheelbase by combining shaft released simultaneously selectable.


272#
epc_mem 發表於 2016-4-20 17:35:37 | 只看該作者
小龍哥, 請問有無試車片睇呀 ?
271#
janlai1018 發表於 2016-2-8 21:02:01 來自手機 | 只看該作者
Thank you
270#
正苦雜工 發表於 2016-2-4 21:28:59 來自手機 | 只看該作者
我用舊野冇走位呀
269#
正苦雜工 發表於 2016-2-4 21:28:24 來自手機 | 只看該作者
http://www.rcmart.com/spec-sprtmmf04-aluminium-motor-mount-heat-sink-blue-tamiya-mf01-p-64637.html?cPath=595_744_1760
268#
janlai1018 發表於 2016-2-3 00:12:03 來自手機 | 只看該作者
請問個摩打好易走位,有咩解決方法?thank all
267#
terrykan 發表於 2016-2-1 14:40:57 | 只看該作者
呢個一定要換啦!
266#
正苦雜工 發表於 2016-2-1 01:00:09 | 只看該作者
冇問題, 剛剛係食粥入左3隻長度既星星鋁中軸, 輕左好多!
265#
sennaleung 發表於 2016-1-12 18:20:05 來自手機 | 只看該作者
Ching , 快牙可否用原本的軸  thx
264#
sennaleung 發表於 2016-1-12 17:32:11 來自手機 | 只看該作者
Ching TL01 快齒可否用原裝軸 thx
263#
hkfrakie2000 發表於 2016-1-4 20:37:55 來自手機 | 只看該作者
多謝師兄通知,買了兩套TL01快齒~~~
262#
正苦雜工 發表於 2016-1-2 08:48:54 來自手機 | 只看該作者
偉高剛剛返左TL01快齒,有興趣就快啦
261#
ek0927 發表於 2015-12-27 01:10:54 來自手機 | 只看該作者
新手入手MF01X,問前直後齒作用?會否勁推頭?另跟車無刷電變有乜平motor推介?現set 210mm用mini cooper壳走平路,謝謝!
260#
ICY 發表於 2015-12-22 15:31:38 來自手機 | 只看該作者
請問快齒仲可以買到嗎?
259#
hkpeople1997 發表於 2015-12-10 14:20:03 | 只看該作者
師兄想問吓架MF-01x 好走嗎?
會唔會好易反車?
258#
 樓主| 小龍 發表於 2015-11-9 07:28:24 來自手機 | 只看該作者
zerohk 發表於 2015-11-2 21:20
請問知唔知邊度有齒輪賣

宏记
257#
zerohk 發表於 2015-11-2 21:20:26 來自手機 | 只看該作者
請問知唔知邊度有齒輪賣
256#
epc_mem 發表於 2015-10-30 13:29:46 | 只看該作者
小龍 發表於 2015-8-1 23:31
感覺好似一架舊星星車!

百鳥歸巢 feel ~
255#
tarotrex 發表於 2015-10-29 19:19:35 來自手機 | 只看該作者
254#
gf01BB 發表於 2015-10-26 01:48:35 來自手機 | 只看該作者
hkfrakie2000 發表於 2015-10-24 23:35
MF-01 X Chassis Option Parts

http://www.tamiya.com/japan/download/pdf/rc/parts/MF01_PARTS_CATALOG.p ...

之前揾唔到~唔該你 hkfrakie2000 ching !
253#
hkfrakie2000 發表於 2015-10-24 23:35:22 | 只看該作者
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-5-6 02:18 , Processed in 0.056074 second(s), 19 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表