想問一下有關焊電變~

之前買左隻sc8電變加4000kv 4pole~
諗住放落xs flux~
聽人講直焊好過用蕉插，因為用蕉會有power loss~
想問一下其實跑落會有幾大分別？
如果用蕉，我手上有3.5mm，定買4mm好。
Thk~<<

exo_oni 發表於 2012-9-22 12:32
我用4.0 , 但我技術差焊得超 UGLY

Me一般般...

無人回...

paulyfrankietam 發表於 2012-9-22 17:50
Use 4mm must be better than 3.5mm due to large contact area on electric conduction

Thk~but one thing I want to know is the "power loss"~~~
reduce the speed?torque?
Pls help me to choice between bullet plug and direct solder~~~~~~
thk

coolcooleric 發表於 2012-9-23 01:07
if u use connectors, there exist "power loss"
however, it is only a small amount in power loss tha ...

Thk~i'll wiring it with plug coz' I maybe jump into a castle motor~