HPI Hell Fire SS (有短片啦)

WTO 兄, 今次我先. 升級版 Hell Fire! 要自己安裝架.

                               
登錄/註冊後可看大圖

短片... 架車好猛, 轉灣反應敏銳. Click 下面幅圖有片睇

                               
登錄/註冊後可看大圖

Features:
Pre-guled Nubz tires
Off-road Molded Wing, Black
Self-lubricating molybdenum rod end set.
52T Lightweight Spur Gear
Optional front lower suspension mount (+2 to -2 degrees)
Machined purple, anodized, aluminum shock cap
TiN suspension shafts
7075 machined aluminum front and rear braces
Finned, machined aluminum, purple anodized engine mounts.
Machined 5mm hard anodized aluminum shock towers (7075 alloy)
Fine adjustment range in camber link holes
Machined delrin shock pistons
Knurled M17 nut for monster truck and buggy hex adapters.
Machined 3mm lightweight aluminum hard anodized 7075 alloy chassis
7075 machined aluminum steering plate with extra machining to reduce weight and add tie rod clearance
7.5mm thick rear hex adapters. adds steering without loosing rear end grip.
Fiberglass brake pad



[ 本帖最後由 hkopium 於 2006-6-25 00:26 編輯 ]

原帖由 工藤新一 於 2006-6-25 14:13 發表
正哦！
I think “自己组装” is better than "RTR"!!!

I am lazy... I prefer RTR.

Mike 哥, 因住亞嫂打你 pat pat.

原帖由 mikewu 於 2006-6-25 15:03 發表


My pat pat already "Far lee far look" ga la....  another one wouldn't hurt.....  
Hey, MMS next week?

hor hor hor

Tuesday night lar. Wed 要返新工