性能强悍的2.4g的国产板即将面世

配合高性能低价格的国产2.4g高频头，哈哈！值得期待

真強 真強

..........

如果加埋brushless就真係强悍喇

到唔係太明白有幾强桿??

So in your mind
if I cancel that "two holes" and add a plug connecter,then it would be OK? Or just because Ky manufacture a pcb with 2 channel and integration the esc&servo,others couldn't do it again anyway?

Still, when I look at the size, shape, the "2 holes" and the purpose (2 channel pcb for miniz or AWD), it is difficult for you to convince the court. You can't deny that you are making an option p ...
billy86che 發表於 2009-6-18 11:05

                               
登錄/註冊後可看大圖

good! 但是看起来有点丑，不如我这个漂亮，但性能真的没法比较，哈哈

http://shop.tinyrc.com/d_images//P-Z-PRZ60-a.jpg

This one?
defcone 發表於 2009-6-18 12:18

                               
登錄/註冊後可看大圖

yes, D架仲要係limited , 不過佢地個design用vds 殼,用ky殼要改野加野

國內rc 網 , 大的有多少個姐

蚊車區

                               
登錄/註冊後可看大圖

This one?

没能找到哦，不如提供链接，哈哈

請參考 "ro-Z Pocket Knife" 上 google 能找到,其官網好像倒了去不到
國內某大rc forum 有更多大圖

如能做到並能用回ky / iw 殼價又合理我會考慮
TaBrIs 發表於 2009-6-18 11:49

                               
登錄/註冊後可看大圖

其实我有想过做以部2wd的小车玩，但因为人懒，所以迟迟没有开工，而且内地的车场不多，而且大多不够平整，对12仔结构的 ...
ly800608 發表於 2009-6-18 11:07

                               
登錄/註冊後可看大圖

請參考 "ro-Z Pocket Knife" 上 google 能找到,其官網好像倒了去不到
國內某大rc forum 有更多大圖

如能做到並能用回ky / iw 殼價又合理我會考慮

KO EX-1x 、sanwa M11/M8、futaba 3pk 等可换高频头的遥控器
2PL，mx3，4vf，6ex 等等可改装的遥控器
都能配合这块板子玩
ly800608 發表於 2009-6-16 17:43

                               
登錄/註冊後可看大圖

你所講改裝係咪好似呢到:
http://bbs.rc-evo.com/viewthread ... &extra=page%3D1

姐係將拆出黎的module的白紅黑線對翻黎焊落12V,ppm and gnd位就得?

其实我有想过做以部2wd的小车玩，但因为人懒，所以迟迟没有开工，而且内地的车场不多，而且大多不够平整，对12仔结构的2wd小车可能不太适合。
Ky的4wd的确很强悍，我尝试了很多方案，都无法在相同尺寸下比它做的更合理。

                               
登錄/註冊後可看大圖

46# ly800608

HaHa! totaly different form the Ky' pcb , because Ky use a mcu do all the job, It needs some program ,but we different. I mean different from the program ,also different form the chip.


ly800608 發表於 2009-6-18 11:00

                               
登錄/註冊後可看大圖

Still, when I look at the size, shape, the "2 holes" and the purpose (2 channel pcb for miniz or AWD), it is difficult for you to convince the court. You can't deny that you are making an option part for the brand name products that does not demonstrate a new design. Here the "new design" should not be a "trivial" one.

HaHa! totaly different form the Ky' pcb , because Ky use a mcu do all the job, It needs some program ,but we different. I mean different from the program ,also different form the chip.

Changing the fets and servo control IC does not mean a new design. Rather, it seems more likely to be copying.
billy86che 發表於 2009-6-18 10:47

                               
登錄/註冊後可看大圖

Ky's 2.4g only can works with the KO transmitter. But the new one give the players new choice, A lots of players can use the transmitter they like for the miniz.
Also,because of the using of new FET  ...
ly800608 發表於 2009-6-18 10:10

                               
登錄/註冊後可看大圖

Changing the fets and servo control IC does not mean a new design. Rather, it seems more likely to be copying.

Thanks a lot for your suggestions,
And how do you think the problem about the 1:28 racing RC,
I think the most big problem is un-compatible with others,
in other words , if you like the ky miniz, y ...
ly800608 發表於 2009-6-18 10:17

                               
登錄/註冊後可看大圖

Why not? You can make another car of the same size.

Thanks a lot for your suggestions,
And how do you think the problem about the 1:28 racing RC,
I think the most big problem is un-compatible with others,
in other words , if you like the ky miniz, you will have no other choices.

40# billy86che

用了ky 的2.4 module 收到嗎?

Ky's 2.4g only can works with the KO transmitter. But the new one give the players new choice, A lots of players can use the transmitter they like for the miniz.
Also,because of the using of new FET and new servo contral IC, The performance of racing will be improved.

KXsho has 2.4G already. What "IMPROVEMENT" have yours made?
billy86che 發表於 2009-6-18 07:51

                               
登錄/註冊後可看大圖