RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: TA-02 雜問 [打印本頁]

作者: qiix    時間: 2008-8-19 22:06
標題: TA-02 雜問
今年購入,殼是全新的但底板不知是哪裡出品,

請問各位知唔知要用咩黎頂住排直電呢.....(是否欠配件)........

另外,想粗玩這架車,有咩建議可以改ga.......(最近只買了四支全新星).......

[attach]185043[/attach][attach]185044[/attach][attach]185045[/attach][attach]185046[/attach][attach]185047[/attach][attach]185048[/attach][attach]185049[/attach]
作者: Sin    時間: 2008-8-19 22:17
絕版HPI底板  
HPI made alot of option parts for Tamiya Cars in early 90's, it is worth some money today because it is rare than the Tamiya chassis. If i own it, i will not play it anymore.
The battery hold by " Magic Sticker" through the space on the 2nd floor plate.

[ 本帖最後由 Sin 於 2008-8-19 22:22 編輯 ]
作者: G4guy    時間: 2008-8-19 22:17
原帖由 qiix 於 2008-8-19 22:06 發表
今年購入,殼是全新的但底板不知是哪裡出品,

請問各位知唔知要用咩黎頂住排直電呢.....(是否欠配件)........

另外,想粗玩這架車,有咩建議可以改ga.......(最近只買了四支全新星).......

絕版406殼,要嚟粗玩???

[ 本帖最後由 G4guy 於 2008-8-20 00:38 編輯 ]
作者: qiix    時間: 2008-8-19 22:24
原帖由 Sin 於 2008-8-19 22:17 發表
底板 by HPI.
HPI use to make alot of option parts for Tamiya Cars, it is it worth some money today.
the battery hold by " Magic Sticker"



Thx for your info....!

Yes ar, ......我想改裝少少粗玩........

只買了四支全新星星pink option油壓jar.......
作者: Sin    時間: 2008-8-19 22:25
標題: 回復 4# 的帖子
any scratch on the chassis?? looks like very new!!
作者: chacha    時間: 2008-8-19 23:12
用索帶或者纖維膠紙扎實舊電,
作者: chacha    時間: 2008-8-19 23:14
原帖由 G4guy 於 2008-8-19 22:17 發表

絕版406殼,要嚟粗玩???

咦,個殼咁經貴,年頭見全新齊件賣$80,早知…
作者: keio80    時間: 2008-8-20 00:35
不如同我交換架TT-01比你粗玩啦。
作者: qiix    時間: 2008-8-20 14:34
原帖由 Sin 於 2008-8-19 22:25 發表
any scratch on the chassis?? looks like very new!!


Hi sin,

It is a used car with few scratch at the bottom of car plate. I've taken the deep cleaning and removed plastic stains on the car chassis. Condition of carbon plate is okay at around 85% new.

我初時仲以為底板係"老展"出品tim..........原來係"HPI option.. "...........

依家都係翻新靚佢算la........
super super thanks
作者: chowhungjai    時間: 2008-8-21 02:05
原帖由 G4guy 於 2008-8-19 22:17 發表

絕版406殼,要嚟粗玩???

Yes, those vintage should live in a shelf!!!
作者: Sin    時間: 2008-8-21 13:50
the setting of 老展 is similar, but you can identifly by the slot cut on the second floor plate that this is the HPI version.




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/) Powered by Discuz! X3.2