RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: EDGE tuber for AX10 (Updated on 2nd Sep 2008) [打印本頁]

作者: sunfffd 時間: 2008-5-19 20:39
標題: EDGE tuber for AX10 (Updated on 2nd Sep 2008)
廢話少講
去片

Stock Stage

登錄/註冊後可看大圖

Torn Stage

登錄/註冊後可看大圖

Edge Tuber Chassis

登錄/註冊後可看大圖

Skid Plate

登錄/註冊後可看大圖

Motor Plate

登錄/註冊後可看大圖

Let's see what will happen next!!!

and Thanks Brother Edison for the parts!!

[ 本帖最後由 sunfffd 於 2008-9-2 12:24 編輯 ]

作者: kaho0338 時間: 2008-5-19 20:40
money money money ....

作者: eason 時間: 2008-5-19 21:24
how much is this tube chassis ??........

作者: kaho0338 時間: 2008-5-19 21:27

原帖由 eason 於 2008-5-19 21:24 發表

 登錄/註冊後可看大圖

how much is this tube chassis ??........

$79us not include shipping... expensive stuff

作者: sunfffd 時間: 2008-5-19 21:52
Dissection

登錄/註冊後可看大圖

droop shock setup

登錄/註冊後可看大圖

BTA Steering

登錄/註冊後可看大圖

作者: edison 時間: 2008-5-19 22:01
Nice idea!!!

作者: simontam 時間: 2008-5-19 23:41
3racing coming soon有大量option........

http://www.3racing.hk/products_l ... &carkits_key=84

作者: sunfffd 時間: 2008-5-20 01:36
that's all for today!

登錄/註冊後可看大圖

作者: stig 時間: 2008-5-20 01:46

登錄/註冊後可看大圖

好正張相, 我3隻starwar板

作者: stig 時間: 2008-5-20 01:49

登錄/註冊後可看大圖

yahoo copy的, 仲有黑武士同 R2D2

作者: hkcosmo116 時間: 2008-5-20 08:20
個車胎好唔好用呀? 係香港冇冇得買呀?
你隻鈴買左幾錢呀? 係唔係$550

作者: kaho0338 時間: 2008-5-20 09:53

原帖由 hkcosmo116 於 2008-5-20 08:20 發表

 登錄/註冊後可看大圖

個車胎好唔好用呀? 係香港冇冇得買呀?
你隻鈴買左幾錢呀? 係唔係$550

losi 車胎鍵全 $380

作者: Patrick6 時間: 2008-5-20 10:18

原帖由 kaho0338 於 2008-5-20 09:53 發表

 登錄/註冊後可看大圖

losi 車胎鍵全 $380

$380 for 4 Nos.?

作者: sunfffd 時間: 2008-5-20 10:33

原帖由 hkcosmo116 於 2008-5-20 08:20 發表

 登錄/註冊後可看大圖

個車胎好唔好用呀? 係香港冇冇得買呀?
你隻鈴買左幾錢呀? 係唔係$550

車胎係好野，請放心使用

鈴 1 set $550

用落OK, 但內beadlock ring 好軟

[ 本帖最後由 sunfffd 於 2008-5-20 10:34 編輯 ]

作者: kaho0338 時間: 2008-5-20 10:54

原帖由 Patrick6 於 2008-5-20 10:18 發表

 登錄/註冊後可看大圖

$380 for 4 Nos.?

yes....i think they still have last set

作者: Patrick6 時間: 2008-5-20 14:02
想請教各位師兄及AX-10 用家, 呢隻HPI Jeep Rubicon Body 是否適合裝落 AX-10 度呢? 香港又能否買到呢? 請多多指教! Thanks!

作者: edison 時間: 2008-5-20 16:50

原帖由 Patrick6 於 2008-5-20 14:02 發表

 登錄/註冊後可看大圖

想請教各位師兄及AX-10 用家, 呢隻HPI Jeep Rubicon Body 是否適合裝落 AX-10 度呢? 香港又能否買到呢? 請多多指教! Thanks!

快倢可能有

作者: sunfffd 時間: 2008-5-25 22:06
終於完成
謝謝各師兄

登錄/註冊後可看大圖

作者: 330324059 時間: 2008-5-26 02:07
好正

仲想問一問咁樣改會好爬啲?

[ 本帖最後由 330324059 於 2008-5-26 12:25 編輯 ]

作者: kaho0338 時間: 2008-5-26 02:08

原帖由 330324059 於 2008-5-26 02:07 發表

 登錄/註冊後可看大圖

好正仲想問一問咁樣改會好爬啲咩

of cause ....low CG

作者: sunfffd 時間: 2008-9-2 12:23
標題: updated on 2nd Sep 2008
是次補品：

Mud Slinger 2.2
3Racing Drive Shaft
TCS Boomerang 4-link plate (Pending)

睇睇對野先

登錄/註冊後可看大圖

同Losi Rock Claws相比, 真係好大對下，但比較硬，唔知好唔好爬，星期日試!

登錄/註冊後可看大圖

3仔 drive shaft，抵玩! 連水貨佬都想大量入貨抄作添。可想而知套野幾搶手

登錄/註冊後可看大圖

舊果set已被摧殘，扭曲晒

登錄/註冊後可看大圖

完成

登錄/註冊後可看大圖

作者: simontam 時間: 2008-9-2 19:12
Hi sunffd，你架車同我架9成相似，我都仲砌緊

作者: powis 時間: 2008-9-3 01:53
looks great but your car now "loaded" so lower than normal crawler, will it decrease the ability of crawling?

作者: sunfffd 時間: 2008-9-3 02:24

原帖由 powis 於 2008-9-3 01:53 發表

 登錄/註冊後可看大圖

looks great but your car now "loaded" so lower than normal crawler, will it decrease the ability of crawling?

thanks
It will infact enhance the crawling ability because the center of gravity is much lower now
The damper setting I'm running is an internal spring setup below the shock piston, which is also known as the 'droop' setup

作者: powis 時間: 2008-9-3 14:23

原帖由 sunfffd 於 2008-9-3 02:24 發表

 登錄/註冊後可看大圖

thanks
It will infact enhance the crawling ability because the center of gravity is much lower now
The damper setting I'm running is an internal spring setup below the shock piston, which is also ...

I am also thinking why many design of crawler such as AX10 and CR01, the battery position is on the top of the car, seems they did not consider the CG issue...they must have their reason for that design. Anyway i doesn't mean that set the CG low has problem (as my CR01 also set the CG to very low haha). Just thinking your car set it so "low", you will not worry about the car 成日比D石"浪"起? (As i did not try crawling so just have this question!) Thanks!

作者: sunfffd 時間: 2008-9-3 15:15

原帖由 powis 於 2008-9-3 14:23 發表

 登錄/註冊後可看大圖

I am also thinking why many design of crawler such as AX10 and CR01, the battery position is on the top of the car, seems they did not consider the CG issue...they must have their reason for that ...

I guess the reason is due to marketing

If we look into the battery position,
Since 6cell NiMh 7.2v battery pack is quite popular and universal among lots of different RC models, it should be more convenient for people to get hold of such battery size.

As you may know, Axial has released an axle battery/servo plate as an option part, they should have reason for that too

(They need to make extra cash

, think about Tamiya's option parts and stock parts) That surely improve performance. However, using that drivers may need to use some extra cash to make some custom-soldered "split" cells or purchase some special sized lipos. Guess that's for more intermediate or advanced drivers

If you look at all the competition rigs, you'll see that almost 99% of the rigs are using axle battery or even electronic placement

But if you consider hardcore rock crawling, it can be observed that CR01 may not do the job so well in a stock form due to the weight distribution. Lowering the CG helps but still not as good as a 4-link geometry chassis. I treat it has an great and fun off-road truck with extra obstacle-clearing ability, but not an exact "crawler".

Hanging on the rocks or not, it really depends on the driver's choice of path and experience, I guess that's similar to track racing

In fact I'm still working on my rig with different settings to see what suits me the best, each of the settings should have it's pros and cons. It's just eventually turned out that I'm having a low CG settings.

Just my 2cents

[ 本帖最後由 sunfffd 於 2008-9-3 15:27 編輯 ]

作者: sunfffd 時間: 2008-9-3 15:28

原帖由 simontam 於 2008-9-2 19:12 發表

 登錄/註冊後可看大圖

Hi sunffd，你架車同我架9成相似，我都仲砌緊

幾時出黎玩

有局喎

作者: powis 時間: 2008-9-3 18:43

原帖由 sunfffd 於 2008-9-3 15:15 發表

 登錄/註冊後可看大圖

I guess the reason is due to marketing
If we look into the battery position,
Since 6cell NiMh 7.2v battery pack is quite popular and universal among lots of different RC models, it ...

Thank you for your detail explanation!

作者: simontam 時間: 2008-9-3 23:21
標題: 回復 27# 的帖子
秋天涼番d一齊玩

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)