RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: DEX408 all ready... [打印本頁]

作者: DK666 時間: 2012-8-6 11:53
標題: DEX408 all ready...

作者: Lotus 時間: 2012-8-6 12:21
砌完覺得點?

作者: mlee 時間: 2012-8-6 12:26
What is the space between the motor and battery?

作者: lcman 時間: 2012-8-6 12:46
注意車架在跳落地時會微曲。車殼後開孔應是長橢圓。如果按樓主用正圓孔，車殼好快要報廢。

作者: 52x 時間: 2012-8-6 15:13
嘩！黄色戰衣

作者: DK666 時間: 2012-8-7 10:27

lcman 發表於 2012-8-6 12:46
注意車架在跳落地時會微曲。車殼後開孔應是長橢圓。如果按樓主用正圓孔，車殼好快要報廢。 ...

我從來都唔開circle hole

作者: DK666 時間: 2012-8-7 11:42

Lotus 發表於 2012-8-6 12:21

登錄/註冊後可看大圖

砌完覺得點?

with alot of HAND PAIN...

作者: DK666 時間: 2012-8-7 11:44

mlee 發表於 2012-8-6 12:26

登錄/註冊後可看大圖

What is the space between the motor and battery?

Around 1mm

作者: mlee 時間: 2012-8-7 11:47

DK666 發表於 2012-8-7 11:44

登錄/註冊後可看大圖

Around 1mm

Quite tight tolerance... Would pay more attention to this to avoid Litho battery explosions...

作者: DK666 時間: 2012-8-7 11:49

52x 發表於 2012-8-6 15:13

登錄/註冊後可看大圖

嘩！黄色戰衣

Most of my R/C's bodies are the same pattern like the Camaro SS(Bumble Bee Version)

作者: DK666 時間: 2012-8-7 11:51

mlee 發表於 2012-8-7 11:47

登錄/註冊後可看大圖

Quite tight tolerance... Would pay more attention to this to avoid Litho battery explosions...

Well, can't do JACK if you want 550 Size Motor cause of the size...

作者: mlee 時間: 2012-8-7 13:48

DK666 發表於 2012-8-7 11:51

登錄/註冊後可看大圖

Well, can't do JACK if you want 550 Size Motor cause of the size...

try add spacer between motor and holder? Maybe?

作者: DK666 時間: 2012-8-8 11:01

mlee 發表於 2012-8-7 13:48

登錄/註冊後可看大圖

try add spacer between motor and holder? Maybe?

that'll fix the problem. but becareful that the motor might get loose ALOT MORE FASTER cause that happened to me when I was back at the State...

作者: mlee 時間: 2012-8-8 19:54

DK666 發表於 2012-8-8 11:01

登錄/註冊後可看大圖

that'll fix the problem. but becareful that the motor might get loose ALOT MORE FASTER cause that ...

Large size of the spacer would ease the situation.

作者: DK666 時間: 2012-8-9 15:18

mlee 發表於 2012-8-8 19:54

登錄/註冊後可看大圖

Large size of the spacer would ease the situation.

Yes, but for the DEX408...if you add spacerit'll fix the shaft hitting battery problem....but then another problem come out...motor end will hit the servo saver unit(steering unit)

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)