RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: FF03R uu [打印本頁]

作者: trf415msx    時間: 2012-5-19 22:28
標題: FF03R uu
本帖最後由 trf415msx 於 2012-5-19 22:35 編輯

http://www.tamiya.com/japan/products/84288ff03r/index.htm

如果千五蚊我會買!

作者: trf415msx    時間: 2012-5-19 22:33
<The travelling efficiency which uplift FF race/lace and evolved>  Unique travelling feeling only of [hurontomota] nosewheel drive FF-03 chassis of popularity. The tuning model which furthermore polishes the running is the FF-03R chassis kit. As for the largest point, it is not two linker race/lace and the [te] has become the equipment which does not become, the gear box which builds in the “oil enclosure type gear diff.” new was designed. Already, 1 points, as front and back [sutehuna] is modified in the carbon strengthening resin make, adopted the 2mm thick carbon battery plate whose rigidity is high, also role of the upper deck could give by the fact that bis you stop the front end. In addition, suspension to use the TRF damper, as for the suspension arm and upright etc the carbon strengthening resin make. Also drive system equipping TRF universal, the clamp type 5mm thick aluminum wheel hub and the aluminum suspension mount etc, the model which pursues running. It is the chassis kit which uplift the FF class of [tamiyaburanpuri] and [tamiyachiyarenjikatsupu] more.

<Main equipment part>
- Carbon battery plate - Battery stopper - Battery nut - Gear diff. private body - Short reversible suspension arm ●TRF special damper (4) ●44mm swing shaft ●TRF417 cross spider set ●TRF417 wheel axle (2) - Clamp type aluminum wheel hub (5mm thick) - [hutsusokoto] 5mm suspension ball ●φ5.5mm aluminum spacer set ●TB-03 aluminum suspension mount (1A) ●TB-03 aluminum suspension mount (1XD) - High torque servo saber (black) gear diff. case set for ●TA06 gear diff. joint cup set ●TA06 rear (52T) - Bevel gear set for TA06 gear diff.
作者: chacha    時間: 2012-5-20 04:42
trf415msx 發表於 2012-5-19 22:28
http://www.tamiya.com/japan/products/84288ff03r/index.htm

如果千五蚊我會買!

應該約$1700
作者: prowing    時間: 2012-5-20 08:27
原裝牙差, 好似好正!
作者: chacha    時間: 2012-5-20 15:45
prowing 發表於 2012-5-20 08:27
原裝牙差, 好似好正!

都係 TA06 0個隻
作者: s.y.kwok    時間: 2012-5-20 16:21
抵受唔住13.5turbo的,
除非係金屬牙




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/) Powered by Discuz! X3.2