RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: F103 Le Mans Silk Cut [打印本頁]

作者: milkboy 時間: 2011-1-30 16:11
標題: F103 Le Mans Silk Cut
昨天TRC 又再試.....
行7.5t 行2.88齒比.......
直路快到無朋友.......
爽爆.......
哈哈哈.......

作者: haha.wawa 時間: 2011-1-30 17:12
standard setup

作者: 1312 時間: 2011-1-30 18:20
hi c hing,
is it tamiya battery holder???
or the lipo battery is small side?????????

作者: milkboy 時間: 2011-1-30 21:57
回復 3# 1312

Slightly modified at the battery holder.

^^~

作者: 1312 時間: 2011-1-30 22:29
回復 4# milkboy

please show the modifed tips for all F103 fans

作者: milkboy 時間: 2011-1-31 00:16
回復 5# 1312

Simple and fast.
Just use a 6 mm drill to drill the holes of the original battery holder and make the holes a bit larger.
^^~

作者: ilove-benz 時間: 2011-2-10 01:03
本帖最後由 ilove-benz 於 2011-2-10 01:08 編輯

How can fit?show me ! Don't blow water!

作者: milkboy 時間: 2011-2-10 01:22
回復 7# ilove-benz

^^~
真係喎........benz 兄....
先用6mm 鑽咀鑽大車上面個電架果4個窿，
之後用介刀批左果兩隻兩邊電碼腳果兩粒'滴'，就得喇...
^^~

作者: milkboy 時間: 2011-2-10 01:23
回復 7# ilove-benz

^^~
過兩日去TRC 再影清楚d幅相，
再post過喇...
^^b

作者: 葉生 時間: 2011-2-10 09:35
回復 1# milkboy

行7.5?

定係17.5 呀.....

作者: milkboy 時間: 2011-2-10 13:33
回復 10# 葉生

7.5T 呀，
有咩問題?
都係同放火箭既速度差不多之嗎。
^^~

作者: ilove-benz 時間: 2011-2-16 14:44
回復 9# milkboy

ching 有相看嗎?
thank you

作者: nel3838 時間: 2011-2-17 08:05

昨天TRC 又再試.....
行7.5t 行2.88齒比.......
直路快到無朋友.......
爽爆.......
哈哈哈.......
milkboy 發表於 2011-1-30 16:11

登錄/註冊後可看大圖

C-Hing, what tyres are you using? With 7.5T (2.88), is it easy to drive when cornering?

作者: iggihk 時間: 2011-2-17 11:32
C Hing,請問你系咪用到 ground effect lei?
請問ground effect的作用在RC上大唔大?, 因為我想系我部CRC Pro 10上做個實驗好似 Brabham's BT46B用duct fan 抽氣.
你整d殼手工好靚ar!

作者: nel3838 時間: 2011-2-17 13:17

C Hing,請問你系咪用到 ground effect lei?
請問ground effect的作用在RC上大唔大?, 因為我想系我部CRC Pr ...
iggihk 發表於 2011-2-17 11:32

登錄/註冊後可看大圖

M2Cents C-Hing, RC cars are already so low to the ground, it is already ground effect right ,,,,, haha LOL

.

Joking aside, if there are any ground effect at all, it ll probably be minimal (probably more if on indoor with very very flat carpet tracks). Tyres in RC cars will have much much more effect, hence probably worth spending time/energy with tyres.

Of course ground effect decors look cool,,,, which is also important.

Just thoughts...

作者: milkboy 時間: 2011-2-17 16:36
回復 13# nel3838

^^~
Just using 3 racing foam tyres.
It's a bit too fast but no problem during conrninig.
^^V

作者: milkboy 時間: 2011-2-17 16:41
回復 14# iggihk

^^~
ching.....
only RC cars..........ground effect will have more effect on aircraft.
Don't think too much.
^^~

作者: iggihk 時間: 2011-2-18 00:38
hohoho, you guys are right~ may be think too much.
I am going to add a duct fan at the end of the pro ten anyway, will see how it goes.

作者: milkboy 時間: 2011-2-18 02:09
回復 18# iggihk

^^~
Add a pair of wings.....
You can fly.....
HAHAHA
I hope you can post your test result here soon.
^^b

作者: milkboy 時間: 2011-2-18 23:14
回復 12# ilove-benz

^^~
sorry.....
要你等候多時.......
^^V

作者: milkboy 時間: 2011-2-18 23:16
回復 3# 1312

^^~
See my reply at post 20 for details.
enjoy F103 with original mounts for Lipo.

^^~

作者: ilove-benz 時間: 2011-2-18 23:48
回復 20# milkboy

哦!你意思係鑽大個孔由5mm擴大至6mm孔,再磨幼兩支柱
師兄確實聰明
多謝指引

作者: ilove-benz 時間: 2011-2-18 23:50
回復 21# milkboy

http://bbs.rc-evo.com/viewthread ... &extra=page%3D1

作者: milkboy 時間: 2011-2-19 01:41
回復 23# ilove-benz

^^b
benz 兄.......
你果個仲正喇........同我果個比.....
我真係見笑.....
多多指教.....
^^v

作者: nel3838 時間: 2011-2-19 09:10

回復 1312

^^~
See my reply at post 20 for details.
enjoy F103 with original mounts for Lipo.
...
milkboy 發表於 2011-2-18 23:16

登錄/註冊後可看大圖

good engineering wor...

作者: kawada 時間: 2011-2-19 11:44
回復 23# ilove-benz
Really yours ? or just copy from other forum ?

作者: ilove-benz 時間: 2011-2-19 18:02
回復 26# kawada

咩呀? copy 咩?

作者: kawada 時間: 2011-2-19 18:33
本帖最後由 kawada 於 2011-2-19 18:53 編輯

回復 27# ilove-benz
Copy information and photos from other forums, or it is done by yourself ? just want to clarify

This one as what u said

http://bbs.rc-evo.com/viewthread ... &extra=page%3D1

作者: ilove-benz 時間: 2011-2-19 23:32
回復 28# kawada

it is done by my china factory
i have 2 pcs now
1 for my friend

作者: pma 時間: 2011-2-22 22:05
回復 20# milkboy

Good idea and great work ar, C-hing.
You can enlarge the Lipo mount by 3.5mm. Good!!
Now, I can solve my issue la.

作者: milkboy 時間: 2011-2-23 02:04
回復 30# pma

^^~
Just a little trick for all F103 fans.
Enjoy...
^^V

作者: X2CR 時間: 2011-2-25 15:27
Milkboy ching 3R F-1呔邊到有？約幾銀？Thanks!

作者: milkboy 時間: 2011-2-25 15:31
回復 32# X2CR

熊猩林到有喇，RC MART 又有喇，
都唔平，我記得頭尾加埋要250幾蚊。
^^~

作者: X2CR 時間: 2011-2-25 23:07
呔太貴，好以Pro10呔抵買D，長遠計買架Pro10玩仲抵D。Milkboy Thank You!

作者: photocatcher 時間: 2011-2-26 19:24
好似xceed 頭尾加埋都唔駛過200

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)