RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 新電 NiZn [打印本頁]

作者: littlebee 時間: 2009-11-12 16:31
標題: 新電 NiZn
本帖最後由 littlebee 於 2009-11-12 16:40 編輯

唔知會唔會出AAA version
http://www.engadget.com/2009/11/ ... nally-some-cells-w/

Discharge rate:
http://www.powergenix.com/docs/powergenix-specs-aa.pdf

Compare to Ni-Mh
http://www.powergenix.com/technology.php

作者: terencelui 時間: 2009-11-12 22:40
1.6V ??好像都OK WOW

作者: 奸仔 時間: 2009-11-13 10:32

LiPo battery coming next month.

http://www.rc-r246.com/plannning/miniz.html
kelvinswyuen 發表於 2009-11-13 08:50

登錄/註冊後可看大圖

Should be LiFe?

作者: ZeroKwok 時間: 2009-11-13 11:05
AWD好似裝唔落

作者: littlebee 時間: 2009-11-13 14:31
2粒應該得

作者: kevin8810 時間: 2014-1-16 19:16
2A 都OK 1.6V

作者: 偉記 時間: 2014-1-17 11:03
好似一年幾前已經有3a電,已經試過跑,
高V左,麼打快左,力大左,時間長左
塊板熱左,麼打熱左,啤令熱左,
牙差掃左,珠差燒左,車架溶左
我仲有10粒8粒全新,有興趣上CT,送比你

作者: kevt2005 時間: 2014-1-17 15:46
I have been using NiZn AAA batteries for more than 9 months. I have been using them on all 4 of my Mini-Z, with stock FETs and added FETs, various motors from AD Stock, PN50, 33, to custom hand-wound motors (28T). All of my cars and motors are still running fine without any problems at all. Due to higher than standard voltage (nominal 1.6V with peak 1.9V), batteries and motors will be quite hot after running. Whether it will be overheated depends on various factors, one being the gear ratio.

You can refer to my earlier thread below for some info which I won't repeat here.
http://rc-evo.com/xbbs/thread-284069-1-1.html

作者: kevt2005 時間: 2014-1-17 15:54

偉記發表於 2014-1-17 11:03
好似一年幾前已經有3a電,已經試過跑,
高V左,麼打快左,力大左,時間長左
塊板熱左,麼打熱左,啤令熱左,

偉記 C-hing,

If they are free, I would like to take them all from you. When you will be at CT? Thanks in advance.

作者: 趙粉粉 時間: 2014-1-20 15:59

偉記發表於 2014-1-17 11:03
好似一年幾前已經有3a電,已經試過跑,
高V左,麼打快左,力大左,時間長左
塊板熱左,麼打熱左,啤令熱左,

睇完...我笑咗

作者: botaebi 時間: 2014-3-17 18:05

偉記發表於 2014-1-17 11:03
好似一年幾前已經有3a電,已經試過跑,
高V左,麼打快左,力大左,時間長左
塊板熱左,麼打熱左,啤令熱左,

C Hing,請問邊度有售(3a)?想買比EX1kiy用,有冇試過,有冇見議.

作者: wing1203 時間: 2014-3-17 18:55

botaebi 發表於 2014-3-17 18:05
C Hing,請問邊度有售(3a)?想買比EX1kiy用,有冇試過,有冇見議.

EX1 KIY 用返普通AAA電已經可以

作者: botaebi 時間: 2014-3-17 20:59

wing1203 發表於 2014-3-17 18:55
EX1 KIY 用返普通AAA電已經可以

但普通3A义電是1.2v,好多跌到非工作電壓.

作者: ICY 時間: 2014-3-17 21:19

botaebi 發表於 2014-3-17 20:59
但普通3A义電是1.2v,好多跌到非工作電壓.

你用呢隻電，好快要去買過支新控

作者: botaebi 時間: 2014-3-17 21:30

ICY 發表於 2014-3-17 21:19
你用呢隻電，好快要去買過支新控

點解呢??Thx

作者: wing1203 時間: 2014-3-17 21:51

botaebi 發表於 2014-3-17 21:30
點解呢??Thx

你想燒既可以試下的

作者: wing1203 時間: 2014-3-17 21:57

botaebi 發表於 2014-3-17 20:59
但普通3A义電是1.2v,好多跌到非工作電壓.

係 Power Management 度SET NI-MH 就可以

作者: botaebi 時間: 2014-3-17 22:38

wing1203 發表於 2014-3-17 21:57
係 Power Management 度SET NI-MH 就可以

Thx! C hing

作者: kevt2005 時間: 2014-3-17 22:44

botaebi 發表於 2014-3-17 18:05
C Hing,請問邊度有售(3a)?想買比EX1kiy用,有冇試過,有冇見議.

C-Hing, you don't want to use higher voltage batteries on your Transmitter. Instead what you want is batteries with more capacity (mAh). For example, Sanyo/GP/Panasonic/Powerex NiMH batteries. Higher voltage batteries are for motors, lights, mechanical devices that will gain more power with higher voltage.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)