RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: F109 shell [打印本頁]

作者: gimsink 時間: 2009-10-9 14:15
標題: F109 shell
all ching, see see my most ugly F1 shell ever paint in the Hong Kong RC histroy la !! spray semi-transperant blue + no painting original white plastic part + extreme ugly label + some old label out of warehouse box....like it ??
[attach]308512[/attach]

作者: Marco明 時間: 2009-10-9 14:43

可以加埋燈喎!嘿嘿
skywork 發表於 2009-10-9 14:37

登錄/註冊後可看大圖

呢個真係好主意喎~~~

作者: gimsink 時間: 2009-10-9 15:07
I had not put the driver head on...I think no driver is willing to sit on this ugly car...
Also, the 3 racing driver head does not fit the shell !!
I see there is a LED light for the rear end in KWS, where should I plug ? 3rd channel ??

作者: jypepe 時間: 2009-10-9 15:17
it's beautiful, i can see a heart on this car, let's cheer up

作者: abcde 時間: 2009-10-14 10:15
本帖最後由 abcde 於 2009-10-14 10:17 編輯

4# gimsink

you can go to 深水 find find (few dollor) ....must cheaper then KWS...($xx)
just find some red led with 3/5V....then direct connect it to the receiver battery 位

作者: hardmankam 時間: 2009-10-14 10:57

4# gimsink

you can go to 深水 find find (few dollor) ....must cheaper then KWS...($xx)
just find some red led with 3/5V....then direct connect it to the receiver battery 位
abcde 發表於 2009-10-14 10:15

登錄/註冊後可看大圖

It is better to connect a 150ohm resister in series with the LED.

作者: gimsink 時間: 2009-10-14 17:05
OK thanks chings, I will DIY, LED (HK$2) + 150ohm resister (HK$0.5 la), easy job!
What about if I make it blue or green ? ghost fire...haha...

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)