The first thing i make for my D90

It took me 3 night but not finish yet and not really good

好令呀
加油喎C兄

spray it to black could improve the outlook anyway.
But, I did the simplest job........ bought one from Jusco 10- market and it's really nice. Post it later time........

原帖由 eddywon 於 2008-1-18 00:51 發表

                               
登錄/註冊後可看大圖

spray it to black could improve the outlook anyway.
But, I did the simplest job........ bought one from Jusco 10- market and it's really nice. Post it later time........

really which Jusco

Wan Chai Emperor Centre basement lor.....
It's perfect as the toprack but the material is really hard to cut. I pend this job after your trial ar......

This is the one from Jusco at 10-.

原帖由 eddywon 於 2008-1-18 00:51 發表

                               
登錄/註冊後可看大圖

spray it to black could improve the outlook anyway.
But, I did the simplest job........ bought one from Jusco 10- market and it's really nice. Post it later time........

原帖由 0433351410 於 2008-1-18 00:35 發表

                               
登錄/註冊後可看大圖

It took me 3 night but not finish yet and not really good

I think you should change you solder and the power is over 70W,
All your joint is cool soldering, it is very easy to break!
Here is my exp:
http://bbs.rc-evo.com/viewthread ... page%3D3&page=4

[ 本帖最後由 edison 於 2008-1-18 10:55 編輯 ]

0433.....師兄;

師兄出手啦!..     個頂架好正喎,  點整.....

原帖由 edison 於 2008-1-18 10:52 發表

                               
登錄/註冊後可看大圖

I think you should change you solder and the power is over 70W,
All your joint is cool soldering, it is very easy to break!
Here is my exp:
http://bbs.rc-evo.com/viewthread.php?tid= ...

Thanks Edison兄 help
So is that u mean all i need is just buy the solder is over 70W?
Thank You
By the way your 車(織) is really really cool where can you buy the thing to make ar?
thank you again

[ 本帖最後由 0433351410 於 2008-1-18 21:37 編輯 ]

原帖由 carmanae86 於 2008-1-18 20:46 發表

                               
登錄/註冊後可看大圖

0433.....師兄;

師兄出手啦!..     個頂架好正喎,  點整.....

Carman兄 u 言重ar is just same as edison tell us the way to make it not really hard try try al