My Gmade Spider Arrived! Please help.......

I just got this Gmade Spider today!
I am a newhand in Crawler, can anyone teach me which ESC, servo, motor, battery, shocks/spring are best for this truck please?
Should I use brushless motor system or not?
Should I change the wheels to beadlock? I see a C Hing here put lead weights on the front wheel, should I do it with this truck?

Sorry I have so many questions, because I know nothing about this truck.......

Thank you very much for your help.

[ 本帖最後由 nemo 於 2008-1-15 01:07 編輯 ]

你要玩無刷就要買兩個esc因為而家無一隻esc可以用兩隻無刷
http://www.teamnovak.com/products/esc/3219_Goat/index.html
我用緊呢隻.用兩隻有刷55T超正.用過你會覺得其他無得比(暫時)
servo用mg599大陸做都ok架.幾十蚊掃左齒都唔心痛
電我用li-po因為我手上有係度
控我用dx6.
玩 Crawler最緊要esc個bec.Ａ數要夠大因你要用兩隻大扭力servo用平價esc會
燒
有唔明大家可以再研究

beadlock.......http://www.shopatron.com/product ... 1/136.0.791.0.0.0.0

仲有你架車個波箱有其他C兄用過....過....要......補強

Thank you Ken8298, I will go to KWS to find those items.

Could you tell me how the reinforce the gearbox? What parts I need to buy?

Thank you.

Hi bro nemo.
there is a crawler party at this sunday. you may come to take a look.

                               
登錄/註冊後可看大圖

http://www.rc-daily.com/forum/vi ... p;extra=&page=1

我都有架 spider 2
我用有刷 55t 都要加個 3:1 波箱先夠力。無加架車會好爆 & 無力爬
去至樂問下佢仲有無貨，記住要買金屬那個喎
如果你用埋鋁製 beadlock rim 都可以不用加鉛啦
星期日來石澳睇睇吹下水囉，好過上 forum 齋問

                               
登錄/註冊後可看大圖

Cool Man.....fun fun fun

Thank you for everyone for your advise!!

Hopefully I can come to Shek O to join your Crawler Party if I don't have to work this Sunday.

咁可以約出黎食食飯吹吹水
我星期日都唔去得

原帖由 聶風 於 2008-1-15 12:01 發表

                               
登錄/註冊後可看大圖

我都有架 spider 2
我用有刷 55t 都要加個 3:1 波箱先夠力。無加架車會好爆 & 無力爬
去至樂問下佢仲有無貨，記住要買金屬那個喎
如果你用埋鋁製 beadlock rim 都可以不用加鉛啦
星期日來石澳睇睇吹下水囉，好過 ...

hi bro nip fung.......the shell is very nice.......is it from HPI or Proline ??....... Thx !!

Could you tell me how the reinforce the gearbox?.......聶風兄會幫到你個問題

原帖由 minimini 於 2008-1-16 01:43 發表

                               
登錄/註冊後可看大圖

hi bro nip fung.......the shell is very nice.......is it from HPI or Proline ??....... Thx !!

proline 1/8 ford 150，不過 proline 唔再 f-150 shell了

原帖由 ken8298 於 2008-1-16 01:54 發表

                               
登錄/註冊後可看大圖

Could you tell me how the reinforce the gearbox?.......聶風兄會幫到你個問題

入去逐頁睇啦
http://www.rc-daily.com/forum/vi ... &extra=page%3D9