RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 1624|回復: 13
打印 上一主題 下一主題
收起左側

buy DF03

[複製鏈接]
跳轉到指定樓層
1#
kennethwsl 發表於 2007-8-14 17:04:49 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
Hi all. I'm new to r.c buggy...

'Poisoned' by you brothers for months..  finally decided to buy a DF-03...

Hope can rush for Sunday's Gathering.. (which is really 'rush'...)

anyway.. looking forward to have fun with you guys..
2#
bigben 發表於 2007-8-14 17:05:42 | 只看該作者
no need to say more..
just buy and play.
3#
gibson 發表於 2007-8-14 17:12:44 | 只看該作者
Good luck, this is only the beginning!!
4#
 樓主| kennethwsl 發表於 2007-8-14 17:16:06 | 只看該作者
I checked previous post.. I know the 'screw' seems not very good.. I mean the original one..

some brother recommend option screws (hex-screw?)  

how is the situation? is that really a must change item?

havent play 1/10 for long time.. perhaps need to get a new screw driver as well.. :p
5#
li5115 發表於 2007-8-14 18:46:49 | 只看該作者
原帖由 kennethwsl 於 2007-8-14 17:16 發表
I checked previous post.. I know the 'screw' seems not very good.. I mean the original one..

some brother recommend option screws (hex-screw?)  

how is the situation? is that really a must  ...

Yes, I use the titanium one.
6#
mikewu 發表於 2007-8-14 19:26:46 | 只看該作者
I use stainless steel from Speedmind..
7#
stig 發表於 2007-8-14 19:32:00 | 只看該作者
原帖由 kennethwsl 於 2007-8-14 17:16 發表
I checked previous post.. I know the 'screw' seems not very good.. I mean the original one..

some brother recommend option screws (hex-screw?)  

how is the situation? is that really a must  ...


if u want to buy hex-screw, dont buy the 3racing one,
the quality isnt very good
8#
SunLi 發表於 2007-8-14 19:41:29 | 只看該作者
I use the original screws.....
It is okay, not too bad.
9#
ryancmlam 發表於 2007-8-14 19:47:35 | 只看該作者
I use the original Tamiya one. Not bad.
10#
stig 發表於 2007-8-14 19:56:59 | 只看該作者
haha, me also.
for saving money and the original one is not bad, DF03 is a fun car,
dont get it to race~
have fun ^^
11#
 樓主| kennethwsl 發表於 2007-8-14 20:04:23 | 只看該作者
Dear all brothers..

Action speaks louder than words.....
I went to KWS sharp after work.

Here I have
1. Avante MK2 DF-03
2. Tamiya Damper Set
3. 4 extra bearing for steering
4. MC330

wow...  

thinking abt the screw.. or save the $$ for some other options?

anyway....  really 好毒 ar this forum...
12#
ryancmlam 發表於 2007-8-14 20:53:43 | 只看該作者
So louder now.
Anyway, I still use the orignial plastic damper. Performance is tolerable. Need to refill the oil after 10 packs of battery run.
13#
 樓主| kennethwsl 發表於 2007-8-15 11:48:45 | 只看該作者
haha thanks all for your information

havent start making it yet....  ><

I bought #60 damper oil.. is that okay for 'first trial' ?
14#
 樓主| kennethwsl 發表於 2007-8-16 00:08:55 | 只看該作者
hey brother,

I wanna ask:

1) for the 介子, which one I should bought? I mean the 'mm'.. I read some previous post.. but still a bit confused..
2) I wanna know where can get the 魔術貼 for the body? I saw some brother use that and I feel very 'useful' !!!!

thanks ^^
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-4-28 00:55 , Processed in 0.031181 second(s), 15 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表