Subaru Brat試車記(#27有part2+#18新增維修點滴......)

If the epoxy doesn't work (it is the likely case coz the "gl;uable" area is so small), try this 魔術鋼膠. Very strong.

http://www.henrychemical.com/itm00004.htm

初步試驗都似乎係work既....希望聽日順利吧。

good luck for your epoxy glue

good luck.

Araldite is absolutely useless. Use JB Weld la.

我又唔識個牌子就是但啦，點知.......唔理啦，聽日試車再算啦。

混合膠似乎work喎！今日o係TKO咁o既環境一D事都冇……

不過架車o既轉向真係好唔掂，轉得太多啦……加上今日只有一個cheap雞AM控，冇計……

同埋原裝轉向推杆真係好「雞」，玩第二次已經變形……要換啦！

仲有就係原裝呔o係TKO環境完全唔得，一D都唔咬……一擺落地大啖D油已經原地打轉……

冇眼睇！又要換呔！定係真係搵架DF03去……！？

DF03 sure. go go go...

原帖由 ryancmlam 於 2007-8-5 23:02 發表

                               
登錄/註冊後可看大圖

DF03 sure. go go go...

魔鬼呀！~~~ :21: :21: :21: :21: :21: :21: :21:

呢兩日唔落KWS住！豈有此理！