M04 big wheels

With the inspiration by bro 5115,
I made my M04 buggy, only a need a longer front dampers.

你又來

個個搞乜鬼

woooo....... bro gibson 繼 "Crazy Frog" 之後又一巨獻.....

原帖由 minimini 於 2007-7-19 00:25 發表

                               
登錄/註冊後可看大圖

woooo....... bro gibson 繼 "Crazy Frog" 之後又一巨獻.....

The crazy frog needs retired!!  The front wheels are very easy to peel off....  
I hope this one could running good!!  
Just copied from Bro di5115..

原帖由 毒魚 於 2007-7-19 00:20 發表

                               
登錄/註冊後可看大圖

你又來

個個搞乜鬼

Create Ghosts!!

前避震要加長到最少 80mm，可用 雙星 #50520。殼前沙版位要開大D。

我都整架,有機會一齊玩ar.

原帖由 G4guy 於 2007-7-19 00:47 發表

                               
登錄/註冊後可看大圖

我都整架,有機會一齊玩ar.

Welcome to TKO off-road party.

原帖由 li5115 於 2007-7-19 00:37 發表

                               
登錄/註冊後可看大圖

前避震要加長到最少 80mm，可用 雙星 #50520。殼前沙版位要開大D。

I may have this set, let me see, is it the one with the DF-03!!

好似係df-03頭油壓
gibson兄要的話我俾返你

原帖由 vr2xvh 於 2007-7-19 16:17 發表

                               
登錄/註冊後可看大圖

好似係df-03頭油壓
gibson兄要的話我俾返你

No need, I have two more set at home.  The problem solved, I intalled the short CVA dampers 50520 and made it at 76mm.  Perfect!!!  Will find a nice green for a test run!!  

Actually I want to buy a set of new proline buggy tires, but its really expensive, HKD110 per pairs!!
with DF03 rims 33 each.  Total close to HKD300..   playing rc really not cheap!!

原帖由 gibson 於 2007-7-19 17:56 發表

                               
登錄/註冊後可看大圖

No need, I have two more set at home.  The problem solved, I intalled the short CVA dampers 50520 and made it at 76mm.  Perfect!!!  Will find a nice green for a test run!!   :vic ...

細個無錢玩，而家玩翻夠本。

what gear ratio u ar using

原帖由 li5115 於 2007-7-19 18:25 發表

                               
登錄/註冊後可看大圖

細個無錢玩，而家玩翻夠本。

Thanks bro li5115 again!!  I love it very much ar!!!!!  

原帖由 chrishkyung 於 2007-7-19 18:27 發表

                               
登錄/註冊後可看大圖

what gear ratio u ar using

Just use back the original gears!!  

I bought those Proline tires and ready to try them out in TRC this weekend... hope it's worthit...  

原帖由 ccc78 於 2007-7-19 19:10 發表

                               
登錄/註冊後可看大圖

用ＭＸ５　ｓｈｅｌｌ轉唔轉到灣呀？？

MX5 is a nice sports car, it turns very smart, only one thing I want to put, the rear wing!!

After the test run with a tamiya 23T motor, it ran really fast but with GP3300, only ran for 10mins, I may change a lower gear, hope to have more run time!!   Big fun to drive with this little buggy!! ...   very nice..

[ 本帖最後由 gibson 於 2007-8-2 16:12 編輯 ]