RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 3029|回復: 0
收起左側

TRF419FWD登場

[複製鏈接]
 樓主| H2RD 發表於 2020-5-20 19:05:49 | 顯示全部樓層 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
96490086_688203012020908_181446949323407360_o.jpg
95277799_688202712020938_2913130434017624064_o.jpg
96141600_688202415354301_7657851513955418112_o.jpg
95259262_688202825354260_5362338545333698560_o.jpg
95499887_688202632020946_4019283017536110592_o.jpg
95302921_688202745354268_4029674489045319680_o.jpg

A new design FWD conversion kit from H2RD, by using the existing TRF419 series chassis and give you the ability to competitive with nowaday FWD chassis race car on market.

This FWD conversion kit suitable for TRF419/419X/419XR (419 need to use with our special bearing set). Motor and servo located at front position, using the MBL front belt, give you the beneficial of touring car stability while a front wheel drive driving style.
The conversion kit can equip with 419 or 420 suspension mount (Even the 416 suspension mount as well) and arm to fit your personal need, which including the new ARS for 420 from Tamiya (54887). Batteries position can be change according to your weight distribution need, in horizontal or vertical (Shorty batteries only and depends on personal setting). Holes on deck for chassis flex control, to fit different track surface and traction, from carpet to asphalt. A special design bumper plate, give you a ability of install different size of weight for front wheel traction control.

Kit come with the lower damper stay which fit for the Big Bore or SSBB damper from Tamiya. While you can choose the higher damper stay for fast corner track (Optional).

As FWD car need to use a 1M/50K gear differential grease in common, recommended to change to our optional pin to increase the durability. (Optional)

Kit comes with:
- All carbon fiber are Japan Torayca pure carbon fiber material
- 2.5mm chassis
- 2.0mm deck
- 3.0mm front and rear damper stay
- 3.0mm bumper plate
- Batteries holder (Come with screw)
- Aluminium Servo mount
- Japan made MBL front belt

Tamiya 419 chassis is not included in this kit.
Electronics are not included in this kit.
Weight are not included in this kit.

https://h2-rd.com/products/trf419-fwd-conversion-kit

Special bearing set for 419:
https://h2-rd.com/collections/trf419/products/special-bearing-set-for-trf419

Pin for 419 gear differential:
https://h2-rd.com/collections/trf419/products/steel-pin-for-trf419-gear-differential


您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-3-29 05:46 , Processed in 0.083636 second(s), 23 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表