The image below show how to install the steering post on chassis
以下圖片解釋如何安裝20M的轉向在H2RD底板上
Don't install the front lower bulkhead before install this steering.
Put on the M3 x 14 screw (Come with black 12.9 screw)
安裝前先不要安裝前波箱。
轉向柱螺為M3 X 14兩顆。(配置品為黑色)
Put on the spacer and steering post (Come with black colour spacer)
套上兩個墊圈(配置品為黑色,內有螺絲方便鎖死)
之後再鎖上原裝轉向柱。
Put on the ball head and shim as image show, remember put on the shim in between.
按次序安裝波頭在轉向臂上,其後為一個0.3墊圈,再轉過轉向連接,0.3墊圈,最後為20M原裝的六角。
Install the steer on post.
將整組轉向安裝到柱上
Put on shim if necessary (Not included)
有需要的話,可以在鎖螺絲前放置墊片(不跟配)
Put on screw at the end (Come with black 12.9 screw)
最後鎖上螺絲(跟配為黑色)
Well install steering shouldn't touching belt, also the lower bulkhead.
轉向件安裝後,波頭不會接觸到皮帶,而鎖死螺絲亦不會與前波箱有碰撞,
為之安裝正確。