越出越大,可能就嚟會係200A以上呢~
可能有O的人問,玩MODIFIED用120A都夠啦,但其實電子O野,你越有空間俾佢,佢發揮越好。
同埋宜家啲摩打越嚟越快,好快分分鐘行13.5T都要用到120A以上~
TEAM POWER電變就出名價錢平靚正,今次呢個200A會唔會都係靚價呢?
Team Powers International1 小時 ·
Radon Pro V4 (200A) Speed Control is coming soon. Improvements based on Radon Pro V3: Hardware:
* Upgrade version of higher ampere FET to low the hardware internal resistance with more output power.
Besides, its lower IR can lower the speed control working temperature
* With more open line area to dissipate more heat out in term to lower the speed control temperature by extra 6%
* The speed control casing only has 17mm height with 2mm lower
* Extra ~6% weight lighter
* Support Ch3/Ch4 Aux Input signal to control different item function values
* New pcb layout design with better stability and reliablility Software:
* With Ch3/Ch4 Aux function to control one of the below pre-defined control item function
(e.g. IP-Limiter, Throttle Rate, RPM Lock, Initial Brake, Drag Brake, Brake Force, I-BK-RSP, Brake Rate,
Boost Timing, Boost Trig LVL, Boost Trig Rate, Turbo Timing, Turbo Delay, Turbo On Rate)
* Optimize the brake function with better linearity Specs:
. Controls: Forward/Brake/Reverse
. Input Voltage: 2S-3S lipo
. BEC: 6V/7.4V selection/max ~5A
. Motor Limit: 4.0T or over
. Max current: ~200A per phase
. Size: ~38x30x17mm
. Weight: ~37g (not include wiring and fan) Features:
. Ultra-smooth, Precise Throttle and Braking Control
. Compatible with Sensored/Sensorless Brushless Motors
. Data Analysis Capability(RPM, Low voltage and ESC temperature)
. HotWire PC Interface for Advanced Programming and Updating
. Easily Programming through the Program card(not included in the package)
. Built-in one touch On/Off switch with LED
. Bulit-in Low voltage cut-off, Overheat protection and signal loss protection
http://www.team-powers.com/
|