RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 3382|回復: 15
收起左側

Schumacher cat sx2

[複製鏈接]
lcpvcce 發表於 2015-8-26 20:17:52 | 顯示全部樓層 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
本帖最後由 lcpvcce 於 2015-9-6 14:47 編輯

my cat sx2 .................
V4V4 發表於 2015-8-26 20:43:18 來自手機 | 顯示全部樓層
正喎!
tarotrex 發表於 2015-8-26 20:52:27 來自手機 | 顯示全部樓層
怎麼會是分體的
 樓主| lcpvcce 發表於 2015-8-26 20:55:40 | 顯示全部樓層

................. Good question
亞標 發表於 2015-8-26 23:32:56 來自手機 | 顯示全部樓層
好靚! 樓主可否多影幾張呢?
Annie268 發表於 2015-8-27 00:32:40 來自手機 | 顯示全部樓層
Good.....
mlee 發表於 2015-8-27 11:13:31 | 顯示全部樓層
Wow!!!  Ken Gor!!!  The only part in concern is the upper deck!
 樓主| lcpvcce 發表於 2015-8-27 11:53:50 | 顯示全部樓層
本帖最後由 lcpvcce 於 2015-9-6 14:47 編輯
mlee 發表於 2015-8-27 11:13
Wow!!!  Ken Gor!!!  The only part in concern is the upper deck!

Yeah just finished rebuilt .
mlee 發表於 2015-8-27 12:10:23 | 顯示全部樓層
Did you add front one way pulley..  
 樓主| lcpvcce 發表於 2015-8-27 18:38:52 | 顯示全部樓層
mlee 發表於 2015-8-27 12:10
Did you add front one way pulley..

No la......... display only .
paulyfrankietam 發表於 2015-8-29 19:59:36 | 顯示全部樓層
C-hing how to build this saddle pack edition SX2, can show me, I have this one , the Lipo battery is the problem only use thin type . Also the Spur gear centre not use the bearing to hold the shaft. Thanks!
tiger1 發表於 2015-8-30 08:12:30 | 顯示全部樓層
paulyfrankietam 發表於 2015-8-29 19:59
C-hing how to build this saddle pack edition SX2, can show me, I have this one , the Lipo battery is ...

no bearing in center!!!!?????
Ozman 發表於 2015-8-30 23:42:34 | 顯示全部樓層
好正和,有無試車報告?
 樓主| lcpvcce 發表於 2015-8-31 20:55:29 | 顯示全部樓層
tiger1 發表於 2015-8-30 08:12
no bearing in center!!!!?????

yes............

tiger1 發表於 2015-9-1 07:17:07 | 顯示全部樓層

That was a barbaric design!! AYK bobcats 2wd rear gearbox has same issue.... Silly
 樓主| lcpvcce 發表於 2015-9-1 21:04:45 | 顯示全部樓層
tiger1 發表於 2015-9-1 07:17
That was a barbaric design!! AYK bobcats 2wd rear gearbox has same issue.... Silly

Orig. pic.
SchumacherCatSX2-2.jpg
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-3-19 12:43 , Processed in 0.105278 second(s), 17 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表