RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 2762|回復: 8
打印 上一主題 下一主題
收起左側

多圖:近水灣海戰 - 高雄、秋月、藍魔鬼

[複製鏈接]
跳轉到指定樓層
1#
radiant_star06 發表於 2015-8-26 14:47:08 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
近水灣海戰

USS Fletcher
2#
levinw 發表於 2015-8-26 18:55:34 | 只看該作者
Very nice
3#
siukeung1972 發表於 2015-8-26 20:12:26 來自手機 | 只看該作者
閒置的天星
4#
JINROH 發表於 2015-8-26 21:58:30 | 只看該作者
彭哥隻男魔差D捲入海底果次? ^^
5#
 樓主| radiant_star06 發表於 2015-8-26 23:09:46 | 只看該作者
JINROH 發表於 2015-8-26 21:58
彭哥隻男魔差D捲入海底果次? ^^

幾時發生?  呢輯上星期六影嘅。

不過彭司令真係藝高人膽大,隻藍魔鬼船仔細細,但就車到鬼咁遠!



6#
bigbigbig 發表於 2015-8-27 22:02:00 | 只看該作者
so cool !!!!!
7#
Harquebus 發表於 2015-8-28 15:33:10 | 只看該作者
These warships really handle the water well with water breaking over the bows. I want to see the "after-action" report and photos of the hull interior. Surely there is a large quantity of water that gets inside?
8#
 樓主| radiant_star06 發表於 2015-8-28 18:55:16 | 只看該作者
Harquebus 發表於 2015-8-28 15:33
These warships really handle the water well with water breaking over the bows. I want to see the "af ...

Thanks for watching.  

Frankly there was not much water inside the hull "after-action".  Nor was it completely dry.  Water may have entered the hull from the turning shafts although the tubes were already fully filled with grease before sail.  Another possiblity of water inlet were the rudder tubes due to high water pressure directly behind the propellers.  What I'm saying is, it seems unlikely that water entering the hull was from above deck.  It's a pity that I had not taken any picture of the boats showing iinside of the hulls.  Maybe next time after sailing in rough sea.

  

  

9#
 樓主| radiant_star06 發表於 2015-8-28 19:03:03 | 只看該作者
Harquebus 發表於 2015-8-28 15:33
These warships really handle the water well with water breaking over the bows. I want to see the "af ...

I'm asking just out of curiosity.  Can you read Chinese, even those colloquial terms widely used in this forum?  



您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-4-29 17:55 , Processed in 0.032298 second(s), 17 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表