M03 想改金屬轉向杯

try XSPEDE la~~

多謝各位師兄的意見, 我果部只係M03,
所以我先問邊隻好,
1.  如果細好,就一次過換哂細啤令,細轉向杯,king pin,
2. 如果唔係就只買對(大啤令)轉向杯

如果之前有咩講得唔清楚,令大家誤會,請見諒!

原帖由 教主 於 2007-2-6 15:38 發表
try XSPEDE la~~

So pretty, thanks for your suggestion.

細好...細好...... and it is new version of tamiya

原帖由 rctc3rc 於 2007-2-6 18:28 發表


So pretty, thanks for your suggestion.

吾止靚仔~ 重好硬淨架~~

XSPEDE有冇出到m03萬向,大約幾錢

有出.......dont know 幾錢...

昨日冇錢買埋,新年後要買了
買萬向洗唔洗買埋藍色輕化果d野

[ 本帖最後由 hoitang55 於 2007-2-7 23:18 編輯 ]

你都係用住鋼萬向先, 輕野吾啱你的~~

Kaho, what camera did you use to take the picture above. Very sharp.

I think the reason of the sharp photo is because of his car is very new......seems never ground .......
Hey where u guys live ? Bring it down to Kowloon bay this Saturday......we have a M03 meeting with track.....good fun

原帖由 007 於 2007-2-8 11:43 發表
Kaho, what camera did you use to take the picture above. Very sharp.

Canon 350d DSLR ....thanks

Kaho, did you use kit lens? I will buy a 400D then.

原帖由 Evo5 於 2007-2-8 12:30 發表
I think the reason of the sharp photo is because of his car is very new......seems never ground .......
Hey where u guys live ? Bring it down to Kowloon bay this Saturday......we have a M03 meet ...

Evo5, where is your track in Kln Bay? What time to meet? Thanks.

原帖由 007 於 2007-2-8 17:34 發表


Evo5, where is your track in Kln Bay? What time to meet? Thanks.

Saturday night kowloon bay (sunshine kowloon bay cargo centre)  

原帖由 007 於 2007-2-8 17:31 發表
Kaho, did you use kit lens? I will buy a 400D then.

yes.....kit lens
and also i use sigma lens too

[ 本帖最後由 kaho0338 於 2007-2-8 20:56 編輯 ]